Abstract:As a major steel producer, China is now eager to develop feasible solutions to recycle and reuse steel slag. However, due to the relatively poor hydration activity of steel slag, the quantity of steel slag used as a supplemental binder material is limited. In order to improve the cementitious properties of steel slag, the strength and carbonation degree of the high-content steel slag powder–cement–metakaolin composite cementitious material system under CO2 curing conditions were investigated. The compressive strengths of the mortar specimens were tested and compared. The carbonation areas were identified and evaluated. A microscopic analysis was conducted using X-ray diffraction (XRD), thermogravimetry analysis (TG), and scanning electron microscopy (SEM) to reveal the chemical mechanisms. The results showed that CO2 curing significantly increased the early strength as the 3D compressive strength of the specimens increased by 47.2% after CO2 curing. The strength of the specimens increased with increasing amounts of metakaolin in a low water-to-binder ratio mixture. The 3D compressive strength of the specimens prepared with 15% metakaolin at a 0.2 water-to-binder ratio achieved 44.2 MPa after CO2 curing. Increasing the water-to-binder ratio from 0.2 to 0.5 and the metakaolin incorporation from 0% to 15% resulted in a 25.33% and 19.9% increase in the carbonation area, respectively. The calcium carbonate crystals that formed during carbonation filled the pores and reduced the porosity, thereby enhancing the strength of the mortar specimens. The soundness of the specimens after CO2 curing was qualified. The results obtained in the present study provide new insight for the improvement of the hydration reactivity and cementitious properties of steel slag powder.

Effects of EDTA on the accelerated carbonation behavior of steel slag used as cementitious materials

Development of high-volume steel slag as cementitious material by ethylenediamine tetraacetic acid induced accelerated carbonation

A comparative study of ethylenediamine tetraacetic acid induced gas-solid and liquid-solid accelerated carbonation for enhancement of steel slag aggregates

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

The Utilization of Carbonated Steel Slag as a Supplementary Cementitious Material in Cement

Early-age carbonation mitigation of SSC by CxS minerals: Mechanism and Performances

Effect of Carbonation Treatment on the Properties of Steel Slag Aggregate

Effect of CO2 treatment on the microstructure and properties of steel slag supplementary cementitous materials

Impacts of Hydration Degree of Steel Slag on Its Subsequent CO2 Capture Behaviors and Mechanical Performances of Prepared Building Materials

Carbonation of EAF Stainless Steel Slag and Its Effect on Chromium Leaching Characteristics

Analysis of Mechanical Performance and Microstructure of Steel Slag Processed with Accelerated Carbonation

Pretreatment of alkali activation and carbonation of steel slag for using as binding material

Carbon sequestration of steel slag and carbonation for activating RO phase

Effect of cement on carbonation behaviors of argon oxygen decarburization stainless steel slag (AODS)

Effect mechanism of steel slag on CO2 capture in hydraulic lime

Utilization of accelerated carbonation to enhance the application of steel slag: a review

Effect of Carbonation Treatment on the Strength and CO2 Uptake Rate of Composite Cementitious Material with a High Steel Slag Powder Content

Effects of carbonation degree on the hydration reactivity of steel slag in cement-based materials

Production of cleaner high-strength cementing material using steel slag under elevated-temperature carbonation

Use of steel slag as sustainable construction materials: A review of accelerated carbonation treatment