Abstract:The flow condensation heat transfer coefficient of R134a inside two helical micro-fin tubes with outer diameter of 6.35 mm and helical angles of 18o and 28o respectively were experimentally studied at a high mass flux ranging from 500 to 1100 kg m−2 s−1. The condensation temperatures are 35°C, 40°C and 45°C, and the vapor qualities ranges from 0.95 to 1.00 at the inlet section and from 0.00 to 0.05 at the outlet section. Experimental results show that there are annular and intermittent flow regimes inside the tube under experimental conditions, the ratio of annular flow region to the total heat transfer region is about 70%. The liquid film flow changes from rotational flow to coexistence of rotational and horizontal flows when the vapor quality is 0.475±0.08, 0.486±0.06 and 0.521±0.05, respectively and the corresponding saturation temperature is 35°C, 40°C and 45°C. Based on the experimental data, the heat transfer coefficient increases with increasing mass flux and fin helical angle, and with decreasing saturation temperature and Reynolds number of cooling water. In addition, the heat transfer coefficient of annular flow is greater than that of intermittent flow, in other words, the heat transfer coefficient increases with increasing vapor quality. The heat transfer coefficient obtained at high mass flux was compared with the calculated data of some published correlations used at low mass flux. It was found that most correlations underestimate the experimental heat transfer coefficient inside the micro-fin tube, and these prediction deviation increases with increasing mass flux and fin helical angle. By introducing some dimensionless numbers as well as considering the flow mechanism of liquid film inside the tube, two heat transfer coefficient correlations were proposed based on the experimental data. The ratio of liquid film thickness to fin height was used to characterize whether the liquid film flow is rotational flow or coexistence of rotational and horizontal flows in the proposed correlation, which shows a better prediction accuracy with a mean deviation of less than 7.3%.

INFLUENCE OF OIL ADDITIVE ON POOL BOILING HEAT TRANSFER OF R134a OUTSIDE HORIZONTAL TUBES

Study on Flow Boiling Heat Transfer Characteristics of R161/oil Mixture Inside Horizontal Micro-Fin Tube

Experimental study on the pool boiling heat transfer of R134a outside various enhanced tubes

Investigation of the influence of POE oil on heat transfer to R134a and R1234ze(E) at enhanced tubes for pool boiling

The Boiling Heat Transfer Characteristics of the Mixture HFO-1234yf/oil Inside a Micro-Fin Tube

Experimental investigation on the heat transfer performance of falling film evaporation with lubrication oil on horizontal tubes having different structures

INFLUENCE OF LUBRICATING OIL ON HEAT TRANSFER OF SUPERCRITICAL CO_2 DURING COOLING

Nucleate boiling heat transfer of R-134a and R-134a/POE lubricant mixtures on smooth tube

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Experimental evaluation on flow boiling heat transfer of R290/POE-oil working fluid for absorption refrigeration in smooth horizontal tubes

Heat transfer enhancement of helical tubes during pool boiling

An Experimental Study on Flow Boiling Heat Transfer Outside Horizontal Enhanced Tubes

Comparison of flow boiling heat transfer characteristics inside different enhanced heat transfer tubes

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

Flow Boiling Heat Transfer Characteristic of Refrigerant R1234ze(E) in Horizontal Circular Tube

Research on the R513A condensation heat transfer characteristics in horizontal microfin tubes

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Flow Boiling Heat Transfer Characteristics in Horizontal, Three-Dimensional Enhanced Tubes

Experimental determination of the role of roughness and wettability on pool-boiling heat transfer of refrigerant

Investigation of Flow Boiling Heat Transfer Characteristics of CO2in Horizontal Mini-Tube

Flow Boiling Characteristics Of R410a In Horizontal Annuli Of Enhanced Surface Tubes