Abstract:Shell-and-tube evaporators are widely used in desalination, refrigeration, and petrochemical industries. The heat transfer process in spray-type evaporators combines the droplets impingement at the top rows of the bundles and falling film evaporation for the bottom rows, with a transitional region in the center of the bundle. Spray evaporators are a promising alternative to flooded-type shell and tube heat exchangers because they run with significantly lower refrigerant charge amounts. This study presents new data for the spray evaporation of low-GWP refrigerant/oil mixtures on an enhanced tube bundle. The experiments involved R134a (HFC) and R1234ze(E) (HFO) paired with synthetic Polyolester (POE68 and POE220) lubricants. The tests utilized a boiling enhanced tube (re-entrant cavity tube) and were conducted at saturation temperatures of −6.7 °C, 2.2 °C and 10 °C (20°F, 36°F and 50°F), with heat flux varying from 3 to 35 kW/m 2 and oil circulation ratio (OCR) ranging from 0.4 % to 2 %. With the addition of oil, the bundle heat transfer coefficient (HTC) of refrigerant/oil mixtures decreased by 20–50 % at an OCR of 1.2 % and a heat flux of 13.5 kW/m 2 , across the tested saturation temperatures. The average wall superheat across the bundle exhibited at least a 48 % increase for all the refrigerant/oil mixtures tested at an OCR of 1.2 %. The viscosity of the refrigerant/oil mixture showed a limited influence on heat transfer compared to surface tension, mainly because the oil concentrations were quite small. Oil promoted a partial dry-out of the tubes, especially at the bottom of the bundle. Foaming was observed and increased with heat flux and oil concentration. Foam sheets on the tube bundle created an additional barrier for the liquid refrigerant to reach the tube heat transfer surfaces and thus decreased the overall bundle heat transfer coefficient.

Investigation of the influence of POE oil on heat transfer to R134a and R1234ze(E) at enhanced tubes for pool boiling

Study on Flow Boiling Heat Transfer Characteristics of R161/oil Mixture Inside Horizontal Micro-Fin Tube

Effect of viscosity grade (POE) on the smooth-tube pool boiling performance with R-1234ze(E) refrigerant

Nucleate boiling heat transfer of R-134a and R-134a/POE lubricant mixtures on smooth tube

Effect of oil concentration, viscosity, and surface tension on tube temperature and heat transfer coefficients of R1234ze(E)/oil spray evaporation on an enhanced tube bundle

Experimental investigation on the heat transfer performance of falling film evaporation with lubrication oil on horizontal tubes having different structures

Experimental evaluation on flow boiling heat transfer of R290/POE-oil working fluid for absorption refrigeration in smooth horizontal tubes

Effect of Subsurface Tunnel on the Nucleate Pool Boiling Heat Transfer of R1234ze(E), R1233zd(E) and R134a

Stratification and Heat Transfer Characteristics for R32-partially Miscible Oil Mixture Flow Boiling Inside a Micro-Fin Tube

INFLUENCE OF OIL ADDITIVE ON POOL BOILING HEAT TRANSFER OF R134a OUTSIDE HORIZONTAL TUBES

Nucleate Pool Boiling Heat Transfer of R134a and R134a-Pve Lubricant Mixtures on Smooth and Five Enhanced Tubes

The Boiling Heat Transfer Characteristics of the Mixture HFO-1234yf/oil Inside a Micro-Fin Tube

Experimental Study of Oil Retention in Microchannel Evaporators and Lubricant Effect on Heat Transfer and Distribution Performances with R32/Pve Mixture

Flow Boiling Heat Transfer Characteristic of Refrigerant R1234ze(E) in Horizontal Circular Tube

Experimental study on the pool boiling heat transfer of R134a outside various enhanced tubes

Impact of oil presence on the evaporator enthalpy working with R1234ze(E) and R1234yf

Heat transfer characteristics of refrigerant-oil mixtures flow boiling in a horizontal C-shape curved smooth tube

Influence of Oil on Nucleate Pool Boiling Heat Transfer of Refrigerant on Metal Foam Covers

Phase Equilibrium of R1234yf and R1234ze(E) with POE Lubricant and Thermodynamic Performance on the Evaporator

EXPERIMENTAL INVESTIGATION AND CORRELATION OF TWO-PHASE HEAT TRANSFER OF R410A/OIL MIXTURE FLOW BOILING IN A 5-MM MICROFIN TUBE

Vapor-liquid Equilibrium Measurement and Heating Performance Modeling on Eco-Friendly Zeotropic Blends of CO2/R1234ze(Z) and CO2/R1336mzz(E)