Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Dual-Band Microstrip Stepped-Impedance Bandpass Filter with Defected Ground Structure

Compact Substrate Integrated Waveguide (SIW) Filter with Defected Ground Structure

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A Dual-Band Filter Using Stepped-Impedance Resonator (SIR) Embedded into Substrate Integrated Waveguide (SIW)

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact Uwb Bandpass Filter with Dual Notched Bands Using Defected Ground Structures

A Compact Quad-Band Bandpass Filter Based on Defected Microstrip Structure

High-Performance Low-Pass Filter Using Stepped Impedance Resonator and Defected Ground Structure

High-selectivity wideband bandpass filter based on quintuple-mode stub-loaded resonator and defected ground structures

Novel Microstrip Bandpass Filter Based On Defected Ground Structure And Slotline Coupling Techniques

Hybrid Microstrip T-Stub/Defected Ground Structure Cell for Electromagnetic Interference Bandpass Filter Design

Controllable Miniature Tri-Band Bandpass Filter Using Defected Microstrip Structure

Hybrid Microstrip/DGS Cell for Filter Design

Compact Superconducting Single- and Dual-Band Filter Design Using Multimode Stepped-Impedance Resonator

Compact Quad-Mode Bandpass Filter Based on Quad-Mode DGS Resonator

Wideband Bandpass Filter with High Selectivity Based on Dual‐mode DGS Resonator