Abstract:In recent years, the ablative discharge of the buffer layer in high‐voltage (HV) cross‐linked polyethylene (XLPE) cables has become a significant challenge for the operation and maintenance of power lines. However, there is a lack of effective methods to address buffer layer discharge defects. A practical approach is proposed to repair buffer layer defects and mitigate the associated discharge issues. To achieve this goal, the principles of repairing buffer layer defects are analysed by establishing an electrical network model that considers different contact states between the buffer layer and aluminium sheath. Based on this analysis, a method involving the injection of solidifiable rejuvenation fluid between the buffer layer and aluminium sheath is proposed to effectively suppress buffer layer discharge defects. Through simulation calculations, the minimum electrical conductivity and injection volume required to establish a reliable electrical connection between the buffer layer and aluminium sheath is determined. Additionally, a curable rejuvenation fluid containing conductive carbon black silicone rubber is prepared and analysed for its conductivity and flow properties at both the mesoscopic and macroscopic levels. Finally, a real cable office discharge test is conducted to compare the discharge behaviour of defective cables before and after repair. The results demonstrate that when the conductivity of the rejuvenation fluid exceeds 10−6 S/m, it effectively establishes a conductive channel between the insulation shield and aluminium sheath, thereby reducing the risk of discharge ablation. Furthermore, after injecting the rejuvenation fluid and completely covering the white mark defect, the discharge phenomenon in the buffer layer is significantly suppressed, leading to the restoration of its electrical performance.

Application Research on Mine Rubber Cable Connection and Sheath Repair

Research on Compensation and Protection of Voltage in Metal Shield of 110kv Power Cable under Three Segments Unsymmetrical State

Performance of Different Grounding Systems of 500 Kv XLPE Long Submarine Cables Based on Improved Multiconductor Analysis Method

Performance Testing and Application Research of Protective Materials for Cable Joints

Analysis of Underground Cable Fire Accidents and Measures of Prevention

Faults Analysis of DC Feeder Cable and Countermeasures

Insulation Resistance On- Line Detection of Coal Mine High Voltage Cable Based on DC Bridge Method

Highly prestressed NPR cable coupling support technology and its application in the deep roadway

Tackling sheath problems: Latest research developments in solving operational sheath problems in underground power transmission cables

Analysis and Countermeasure of 110KV Cable Joint Defects

Development of a Voltage Resistance Device for Low Voltage Cables

On-line Monitoring System for Underground 6 Kv Cable Networks in Coal Mine Based on Additional DC Measurement

Revitalising high voltage cable: Exploring effective repair methods and influential factors for buffer layer defects using conductive silicone rubber

Analysis of DC Cable Fault in Shanghai Metro

Study on Anti-interference Technique of On-Line Monitoring System for XLPE Cable's Sheathes

Development of Online Monitoring System for 1500 V Ethylene–propylene–rubber DC Feeder Cable of Shanghai Urban Rail Transit

Investigation of On-line Monitoring Method on 1500 V Direct Current Cable of Subway

Application and Principle of Bolt-Mesh-Cable Control Technology in Extremely Soft Coal Seam Roadway

Field and Numerical Study on Deformation and Failure Characteristics of Deep High-Stress Main Roadway in Dongpang Coal Mine

Analysis on Buffer Layer Discharges below the Corrugated Aluminum Sheath of XLPE Cables and Comparison with Other Metal Sheath Structures

Power Cable Structure Recovery and Application Based on Mould Melt Joint