Abstract:There is a strong push in recent years for development of high-performance materials to be used in the hot-end components of aero-engines at temperatures beyond the operating range for nickel-based superalloys. The interest in silicides and silicide-matrix composites arises from their high melting points, ability of strength retention, along with impressive oxidation resistance at elevated temperatures, which are considered as desirable. Among the silicides, the molybdenum-, titanium-, and niobium-based multiphase alloys and composites have been found to be the most promising. Whereas MoSi2 has the best high-temperature oxidation resistance among the silicides, its ambient temperature fracture toughness as well as high-temperature strength retention are poor, and then, there are serious difficulties in near-net shaping of components. Therefore, starting from MoSi2 based composites with ceramic reinforcements, a significant attention has been paid during the last two decades to the development of multiphase Mo-Si-B based ternary alloys with bcc-Moss, Mo3Si, and Mo5SiB2. While crack-arrest and plastic deformation of the ductile bcc-Moss contributes to toughening, the presence of Mo3Si and Mo5SiB2 assists in retention of high-temperature strength, as well as formation of a borosilicate scale to protect against oxidation. In the multicomponent Nb-Si-X alloys, the presence of ductile Nbss is responsible for toughness enhancement, whereas the intermetallic silicides or Laves phases contribute to strength retention. This chapter will provide an overview of the crystal structures and phase equilibria in Mo-Si, Ti-Si, and Nb-Si based systems, processing methodologies, evolution of microstructure, mechanical properties, oxidation behavior, and potential applications.

The properties of multiphase Mo-Si-B alloy

The progress in preparation and properties of multiphase Mo-Si-B alloy

From Mo–Si–B to Mo–Ti–Si–B Alloys: A Short Review

Preparation and Properties of High-Temperature Mo-12si-8.5b Alloys

Review of Research Progress on Mo-Si-B Alloys

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

REVIEW ON THE ELEVATED TEMPERATURE OXIDATION BEHAVIOR OF Mo-Si-B ALLOYS

Silicides and Silicide Matrix Composites for High-Temperature Structural Applications

Synthesis of a novel MoSS+Mo5SiB2+Mo5Si3 based Mo–Si–B alloy and its enhanced fracture toughness

Strengthening and toughening of MoSi2 and MoSi2-base dmaterials

High-Temperature Creep and Oxidation Behavior of Mo-Si-B Alloys with High Ti Contents

Microstructure and Oxidation Behavior of Metal-Modified Mo-Si-B Alloys: A Review

Alloy Designs for High Temperature Mo-base Systems

Ultra-high Temperature Mo–Si–B Alloys — Synthesis, Microstructural and Mechanical Characterization

Mo effect on the phase stability and room-temperature fracture toughness of Nb/Nb5Si3 in-situ composites

Processing and Mechanical Properties of Multiphase Composites Based on Mo–Si–Al–C System

Phase composition and mechanical properties of in-situ synthetic Mo-Si compound composites

Developing a uniform distribution of bimodal α-Mo grains in the Mo–Si–B alloy for toughness and strength improvement

Microstructures and Mechanical Properties of Ti–44Al–5Nb–3Cr–1.5Zr–xMo–yB Alloys

The effect of 15 wt% Mo addition on the microstructure and mechanical properties of MoSi2 composite

Optimization of Zr and Mo element on room-temperature fracture toughness and the integrity of oxide film