Abstract:As aero-engines operate under extreme conditions such as high temperatures and speeds, the effectiveness of the engine tends to decrease. Therefore, real-time vibration monitoring of such structures is essential to ensure flight safety. However, the sensors used in the control system are prone to interference, thus leading to ineffective monitoring and eventually reducing the service life of the equipment. Therefore, in this study, a shear vibration sensor for real-time structural monitoring at 750 °C is designed and produced using a Langasite (LGS) crystal. Further, the high-temperature performance of the sensor is examined in the frequency, acceleration, and temperature ranges of 80-1000 Hz, 0.5-5g, and 30-750 °C, respectively. Its linearity is less than 1 %, which meets the application requirements of high-temperature piezoelectric vibration sensors. The average sensitivity of the sensor over the entire temperature range is 0.074 V/g. The sensor has good viability and can be used for testing in high-temperature environment applications as the sensitivity fluctuates by less than 2 % at different temperature points when applied to the same frequency. Furthermore, a temperature-vibration cross-decoupling approach is proposed to determine the acceleration value following temperature demodulation. The highest inaccuracy with respect to the reference acceleration is 4.54 %. Sensors also have a small size, are easy to install, and can maintain high reliability in harsh environments, playing an essential role in health assessment, fault prediction, and diagnosis of engines and other components. Therefore, the developed LGS acceleration sensor offers a promising alternative for real-time monitoring of structures in high-temperature environments, including aero-engines.

A piezoelectric vibration sensor with excellent performance based on Bi12SiO20 crystal for high-temperature applications

High-temperature Vibration Sensor Based on Ba2TiSi2O8 Piezoelectric Crystal with Ultra-Stable Sensing Performance Up to 650 °C

High-temperature Vibration Sensor Based on Ba 2 TiSi 2 O 8 Piezoelectric Crystal With Ultra-Stable Sensing Performance up to 650 °C

Piezoelectric Structural Sensor Technology for Extreme Environments

Piezoelectric Materials for High Temperature Sensors

A High Temperature Piezoelectric Sensor for Structure Health Monitoring

High-temperature shear-type vibration sensor based on langasite piezoelectric crystal

BiScO3-PbTiO3 nanofibers piezoelectric sensor for high-temperature pressure and vibration measurements

Design and Fabrication of a High Temperature Pressure Sensor

Investigation of Ca3TaGa3Si2O14 Piezoelectric Crystals for High Temperature Sensors

High-Temperature Piezoelectric Sensing

Piezoelectric Accelerometer for High Temperature (1300°C) Sensing

Piezoelectricity in Excess of 800 Pc/n over 400 °C in BiScO3–PbTiO3–CaTiO3 Ceramics

Ultra high temperature saw sensors based on signle crystalline a1n and multilayer composite electrode

Thermal Expansion and Electro-Elastic Features of Ba2TiSi2O8 High Temperature Piezoelectric Crystal

High-performance, High-Temperature Piezoelectric BiB3O6crystals

Piezoelectricity in Excess of 800 pC/N over 400 °C in BiScO 3 –PbTiO 3 –CaTiO 3 Ceramics

Ultra-high Curie Temperature Transparent Piezoelectric Bi Doped Ca2Nb2O7 Single Crystals

Piezoelectric Accelerometers for Ultrahigh Temperature Application

Design and Fabrication of a High-Temperature SOI Pressure Sensor with Optimized Crossbeam Membrane.

Design, Fabrication and Characterization of High Temperature Piezoelectric Vibration Sensor Using YCOB Crystals