Abstract:The interphase in silicon carbide fiber-reinforced silicon carbide ceramic matrix composites (SiCf/SiC) assumes a significant role in the mechanical properties exhibited at elevated temperatures. The strength, toughness, and chemical stability of a composite is frequently influenced by the optimization of its interphase. In this work, the MAX phase (Ti3SiC2) and carbon nanotubes (CNTs) were successively deposited on the SiCf using the molten salt method and chemical vapor deposition technique, respectively, to create a hierarchical structure. Transmission electron microscopy was employed to undertake a comprehensive investigation of the interfacial component in SiCf/SiC composites. The detailed study of interphases in SiCf/SiC composites has been conducted through the analysis of crystallization, the bonding natures, and the micromorphology, encompassing geometry and constituent characteristics. A bilayer consisting of TiC–Ti3SiC2/Ti5Si3 and a vertical array of carbon nanotubes (CNTs) with a length of 7 μm is fabricated on the surface of SiCf/Ti3SiC2-CNTs. The SiCf/Ti3SiC2/SiC and SiCf/Ti3SiC2-CNTs/SiC composites exhibit lamellar structures of Ti3SiC2, which indicates a further crystallization of Ti3SiC2 resulting from the formation of SiC matrix by PIP procedure. The interphase of SiCf/Ti3SiC2-CNTs/SiC composite may be categorized into four distinct layers: a TiC phase, a TiSi2 phase, a transition phase of TiSi2/TiC, and a Ti3SiC2 phase. This interphase structure is more intricate compared to the interphase structure observed in the SiCf/Ti3SiC2/SiC composite. This research indicates significant value for the future design and optimization of interfaces.

Fabrication and performance of mini SiC/SiC composites with an electrophoresis-deposited BN fiber/matrix interphase

Mechanical properties of SiCf/SiC composites with h‐BN interphase formed by the electrophoretic deposition method

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Boron nitride (BN) and BN based multiple-layer interphase for SiCf/SiC composites: A review

Overall fabrication of uniform BN interphase on 2.5D-SiC fabric via precursor-derived methods

Effect of BN interfacial layer on the mechanical behavior of SiC fiber reinforced SiC ceramic matrix composites

Influences of the dip-coated BN interface on mechanical behavior of PIP-SiC/SiC minicomposites

Enhanced interfacial properties of hierarchical MXene/CF composites via low content electrophoretic deposition

Influence of fiber surface properties of SiCf/SiC composites on the interfacial debonding behavior

Preparation and tensile behavior of SiCf/SiC mini composites containing different types and thicknesses of interphase

The effect of deposition temperature of BN interphase on the tensile properties of SiC fibers

Effect of BNNTs/matrix interface tailoring on toughness and fracture morphology of hierarchical SiCf/SiC composites

Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires

Fabrication and Properties of SiO2-BN-Si3N4 Composites

Microstructure control of BN interface and its effect on mechanical behavior of SiC f /SiC composites

Effect of PyC/BN interfacial phases on mechanical behavior of SiC/SiC composites

Fine study of hierarchical interphase constructed by Ti3SiC2 and carbon nanotubes in SiCf/SiC composites

SiC/SiC mini-composites with multilayer ZrSiO4 interphase: Room-temperature properties and toughening mechanism

Feasibility study of ZrSiO4 as matrix and fiber interphase of SiC/SiC composite

Relationship between both thickness and degree of crystallisation of BN interphases and the mechanical behaviour of SiC/SiC composites

Microstructure and Mechanical Properties of Cf/SiC Composites with Dispersed C-SiC Interphase Prepared by Chemical Vapor Infiltration