Abstract:3D IC technologies can help to improve circuit performance and lower power consumption by reducing wirelength. Also, 3D IC technology can be used to realize heterogeneous system-on-chip design, by integrating different modules together with less interference with each other. In this paper, we propose a novel thermal-aware 3D cell placement approach, named T3Place, based on transforming a 2D placement with good wirelength to a 3D placement, with the objectives of half-perimeter wirelength, through-the-silicon (TS) via number and temperature. T3Place is composed of two steps, transformation from a 2D placement to a 3D placement and the refinement of the resulting 3D placement. We proposed and compared several different transformation techniques, including local stacking transformation (LST), folding-2, folding-4 and window-based stacking/folding transformation, and concluded that (i) LST can generate 3D placements with the least wirelength, (ii) the folding-based transformations result in 3D placements with the fewest TS vias, and (iii) the window-based stacking/folding transformations provide good TS via number and wirelength tradeoffs. For example, with four device layers, LST can reduce the wirelength by over 2times compared to the initial 2D placement, while window-based stacking/folding can provide over 10times variation in terms of the TS via number, thus adaptive to different manufacturing ability for TS via density. Moreover, we proposed a novel relaxed conflict-net (RCN) graph-based layer assignment method to further refine the 3D placements. Compared to LST results, thermal-aware RCN graph-based layer assignment algorithm (r = 10%) can further reduce the maximum on-chip temperature by 37%, with only 6% TS via number increase and 8% wirelength increase.

A Thermal-Driven Test Application Scheme for 3-Dimensional ICs

A thermal-driven test application scheme for pre-bond and post-bond scan testing of three-dimensional ICs

Three Dimensional ICs Thermal-Driven Test Application Scheme

High-Frequency Electrothermal Characterization of TSV-Based Power Delivery Network

System-Level Analysis of 3D ICs with Thermal TSVs

Thermal-aware small-delay defect testing in integrated circuits

Thermal-Aware Small-Delay Defect Testing in Integrated Circuits for Mitigating Overkill

Thermal-aware Cell and Through-Silicon-via Co-Placement for 3D ICs.

Electrical-Thermal Co-Simulation For Through Silicon Via And Active Tier In 3-D Ic

Thermal-Aware 3D IC Placement Via Transformation

A thermal-driven force-directed floorplanning algorithm for 3D ICs

Thermal-Aware Test Scheduling For Noc-Based 3d Integrated Circuits

A layout-to-simulation approach for thermal design of IC

Thermal-Aware 3d Placement

An Analytical Placement Framework for 3-D ICs and Its Extension on Thermal Awareness

Steady state and transient thermal analysis of hot spots in 3D stacked ICs using dedicated test chips

New Dft Architectures for 3D-Sics with A Wireless Test Port

Yield-aware Time-Efficient Testing and Self-Fixing Design for TSV-based 3D ICs

Rethinking Thermal Via Planning with Timing-Power-temperature Dependence for 3D ICs

Optimization of 3D IC Routing Based on Thermal Equalization Analysis

A Novel Thermal Optimization Flow Using Incremental Floorplanning for 3D ICs