Abstract:This paper represents the design and simulation of tunable bandstop filters by integrated with an RF MEMS shunt switch. The transformation of the bandpass filter to the bandstop filter is also done in this paper. The bandpass and bandstop filters are designed utilizing ECE-shaped DGS resonators within the coplanar waveguide (CPW) structure. Three different types of RF MEMS switches are proposed and investigated. The switch with low pull in voltage and better RF characteristics is considered for integration with filters The BPF exhibits an insertion loss of under 1.6 dB. It offers a relative 3-dB bandwidth of 60% and a 30-dB bandwidth of 77%. In the case of the BSF, it effectively achieves a 20 dB stop band at 20.5 GHz, maintaining a return loss of only 0.3 dB. The tunability of the filter is observed by integrating a MEMS capacitive shunt switch onto the transmission line. A pull in voltage of 4 V is achieved with a high capacitance ratio of 63.9.The simulation and parametric analysis of the RF MEMS switch is carried out by COMSOL and the RF performance of the switch, tunability of the filters are studied with the help of the HFSS FEM tools. The mechanical resonance frequency, other RF performance and tunability of the filters attained a frequency range (18–27 GHz). So the proposed switch and filters are suitable for K band applications, especially for satellite communications applications.

Design and Simulation of 4-Bit 10-14Ghz RF MEMS Tunable Filter

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

A 10&#x2013;14 GHz RF MEMS Tunable Bandpass Filter

Design and Fabrication of a MEMS Bandpass Filter with Different Center Frequency of 8.5-12 GHz.

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

3D Heterogenous Integrated Wideband Switchable Bandpass Filter Bank for Millimeter Wave Applications

Design and simulation of tunable bandstop filters by integrating RF MEMS shunt switch for K-band applications

A Rf-Mems Based Dual-Band Tunable Filter with Independently Controllable Passbands

An Ultra-Broadband Contact-Capacitive RF MEMS Switch for 15-110GHZ Applications

Design and Simulation of a High-Tuning-Range RF MEMS Voltage-Controlled Capacitor

Four‐tap Microwave Photonic Filter with Tunable Center Frequency and Reconfigurable Transfer Function

Design and Tuning of Superconducting Filter at VHF-band with Mechanically Switchable Interdigital Capacitors

Design of a RF MEMS Passive LC Filter

A 12–16 GHz microelectromechanical system-switchable bandpass filter

Design Of Ku-Band Sir Interdigital Bandpass Filter Using Silicon-Based Micromachining Technology

Simulation Design of a High Q Tunable Capacitor with Comb Structure

Four-Pole Narrowband Superconducting Tunable Filter at Vhf-Band

A Miniaturized Reconfigurable Broadband Attenuator Based on RF MEMS Switches

Invited) Tunable RF MEMS and Its Applications

Tunable RF MEMS capacitor for wireless communication

High Performance, Continuously Tunable Microwave Filters using MEMS Devices with Very Large, Controlled, Out-of-Plane Actuation