Abstract:Ultrahigh‐speed casting is the most remarkable feature of billet high‐efficiency continuous casting. The transient fluid flow, heat transfer, and solidification behavior under different casting speeds, submerged entry nozzle (SEN) parameters, and mold electromagnetic stirring (M‐EMS) are investigated using a 3D transient mathematical model. The results show that a typical roll flow pattern is generated for all casting speeds, while a third small recirculation zone developed near the solidified shell at the casting speed of 6.0 m min−1. When the casting speed increases, the impact depth of the molten steel increases from 0.748 to 0.844 m, the velocity and level fluctuation at the steel/slag interface increases, the high‐temperature zone moves downward, and the shell thickness is reduced from 16.2 to 11.1 mm. As the SEN inner diameter and immersion depth increases, the impact depth increases, the velocity and level fluctuation at the steel/slag interface decreases, and the shell thickness at the mold exit is ≈11.0 mm. When the SEN immersion depth and inner diameter are 120 and 40 mm, respectively, the flow and temperature fields in the mold are the most appropriate. In addition, the M‐EMS have a great effect on the fluid flow and heat transfer behavior. A coupled 3D numerical model is established to study the fluid flow, heat transfer, and solidification in a billet continuous casting mold under different casting speeds, submerged entry nozzle (SEN) inner diameters, SEN immersion depths, and mold electromagnetic stirring (M‐EMS). The velocity field, temperature field, steel/slag level fluctuation, and the growth of solidified shell are analyzed comparatively.

A New Solution of Solidification Problems in Continuous Casting Based on Meshless Method.

Solidification modeling in continuous casting by finite point method

Numerical simulation on solidification and thermal stress of continuous casting billet in mold based on meshless methods

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Finite Point Method for the Simulation of Solidification and Heat Transfer in Continuous Casting Mold

Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach

PROGRESS OF SOLIDIFICATION SIMULATION FOR CONTINUOUS CASTING

Numerical Simulation of Solidification and Heat Transfer in Continuously Cast Bloom

Fluid flow and solidification in continuous thin slab casting mold

Mathematical modelling of fluid flow, heat transfer and solidification in a strip continuous casting process

Mathematical Model of Fluid Flow and Solidification in Mold Region of Continuous Slab Casting

Numerical Methods to Improve the Computational Efficiency of Solidification Simulation for the Investment Casting Process

Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction

Solidification Modeling of Continuous Casting Process

Thermomechanical Modeling of Solidification Process of Squeeze Casting I. Mathematic Model and Solution Methodology

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Heat-transfer and solidification model of continuous slab casting: CON1D

Progress in numerical simulation of solidification process of shaped casting

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

INTEGRATED FINITE ELEMENT MODEL FOR TRANSIENT FLUID FLOW AND THERMAL STRESSES DURING CONTINUOUS CASTING

Cfd-Based Multicomponent Model for Solidification of Casting Process