Abstract:In practical engineering, concrete structures typically undergo high temperatures and fire spray cooling during the process of fire, and high temperatures will cause changes in the microstructure of concrete. Therefore, studying the fracture mechanical properties of concrete after rapid cooling at high temperatures is more in line with the actual engineering situation. This paper sets five temperature conditions (20°C, 200°C, 400°C, 600°C, and 800°C), and after rapid cooling in a water bath, a hydraulic servo machine is used to conduct three-point bending beam fracture tests on plain concrete (PC) and high performance concrete (HPC). The fracture process and mechanism are analyzed using digital image correlation (DIC) and acoustic emission (AE). The research results indicate that the three-point bending unstable fracture load of PC and HPC decreases with the increase of temperature, with the maximum reduction after 800 ℃ high temperature, reaching 87.5% and 82.2%, respectively. After high temperature, the fracture energy of PC and HPC both showed a trend of first increasing and then decreasing. The ductility index of PC and HPC increases with the increase of temperature. The unstable fracture toughness and initial fracture toughness of PC and HPC decrease with the increase of temperature. By combining DIC and AE technologies, the development and fracture mode of cracks in PC and HPC after rapid cooling at high temperature are analyzed. The results showed that the softening effect of concrete is more significant after high temperature, the crack initiation stage is earlier, and the bearing capacity is lower. Furthermore, modern testing techniques are employed to reveal the mechanism of the impact of high temperature and cooling methods on the mechanical properties of HPC from a microscopic perspective. The research results have important reference value for practical engineering.

The use of AE technique for identifying ductility degradation against cryogenic on flexural performance of UHPC at various temperature conditions

Thermal-dependent brittleness effect of ultra-high performance concrete exposed to cryogenic flexural loads by acoustic emission evaluation

Failure mechanism of steel fiber pullout in UHPC affected by alternating cryogenic and elevated variation

Investigation of Ultrahigh-Performance Concrete Fracture Characteristics with Different Steel Fiber Fractions Based on Acoustic Emission

Fracture Characterization of Ultra-High Performance Concrete Notched Beams under the Influence of Different Material Factors Based on Acoustic Emission Technique

Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete Beams after Exposure to High Temperatures

Systematic studies on behaviors of ultra-high performance concrete subject to freezing and thawing cycles combining DIC technology

Flexural fatigue behavior of ultra-high performance concrete under low temperatures

High temperature and freeze-thaw study of strengthened concrete with ultra-high-performance concrete

Study on the Fracture Mechanical Properties of High Performance Concrete (HPC) with Rapid Cooling after High Temperature

Flexural Behavior of Ultra-High Performance Hybrid Fiber Reinforced Concrete at the Ambient and Elevated Temperature

Acoustic Emission–Based Shear Fracture Characterization of Ultra‐High‐Performance Concrete With Varying Steel Fiber Contents

Effects of Heating Followed by Water Quenching on Strength and Microstructure of Ultra-High Performance Concrete

Durability of Ultra-High Performance Concrete in Tension under Cold Weather Conditions

Combined effect of natural fibre and steel fibre on the thermal-mechanical properties of UHPC subjected to high temperature

Nanoindentation-based Micromechanical Characterisation of Ultra-High-performance Concrete Exposed to Freezing–thawing

High Temperature Flexural Deformation Properties of Engineered Cementitious Composites (ECC) with Hybrid Fiber Reinforcement

Flexural behaviour and evaluation of ultra-high-performance fibre reinforced concrete beams cured at room temperature

Study on Micro-mesoscale Characterization and Impact Load Mechanical Properties of Ultra-High-Performance Concrete After Sustained Elevated Temperature

Microstructure and mechanical behaviour of 3D printed ultra-high performance concrete after elevated temperatures

Durability of micro-cracked UHPC subjected to coupled freeze-thaw and chloride salt attacks