Abstract:Ultra-high performance concrete (UHPC) is characterized by its ultra-high strength and durability, making it suitable for use in large-span bridges, super high-rise buildings, and other special structures. These types of structures often have high requirements for crack control, making the exploration of UHPC's fracture mechanics properties of significant importance. Therefore, this paper sets up four steel fiber contents (0%, 0.6%, 1.2% and 1.8%) and four strain rates (10-5/s, 10-4/s, 10-3/s and 10-2/s), totaling 16 working conditions. The hydraulic servo system combined with digital image correlation (DIC) technology was used to conduct fracture mechanics tests on UHPC three-point bending beams. The test results show that the unstable fracture load of UHPC increases with the increase of strain rate and steel fiber content, and increasing the steel fiber content can enhance the strain rate effect of UHPC to a certain extent. Additionally, combined with the J-criterion model, this study proposed a dynamic criterion for the unstable fracture load of UHPC considering the influence of steel fiber content. The initial fracture toughness, unstable fracture toughness, and fracture energy of UHPC are significantly more affected by steel fiber content than by strain rate. Through DIC technology, the analysis of UHPC crack propagation shows that UHPC without steel fibers experiences rapid crack expansion in the Pre-90% to Peak stage, with less influence from the strain rate. However, UHPC with steel fibers exhibits a more uniform crack growth rate, with the crack emergence phase gradually lagging as the strain rate increases. For UHPC without steel fibers, the crack opening displacement (COD) at the unstable fracture load point surges suddenly, while the COD development in UHPC with steel fibers is slower. At lower strain rates, an increase in steel fiber content leads to an earlier sudden increase phase in UHPC's COD; at higher strain rates, the influence of steel fiber content on the sudden increase phase of UHPC's COD is more scattered. The research results of this paper provide a theoretical basis for the calculation and analysis of the dynamic response of UHPC structures under seismic loads.

Investigation of Ultrahigh-Performance Concrete Fracture Characteristics with Different Steel Fiber Fractions Based on Acoustic Emission

Fracture Characterization of Ultra-High Performance Concrete Notched Beams under the Influence of Different Material Factors Based on Acoustic Emission Technique

Acoustic Emission–Based Shear Fracture Characterization of Ultra‐High‐Performance Concrete With Varying Steel Fiber Contents

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Study on the Dynamic Fracture Mechanical Properties of Ultra High-Performance Concrete under the Influence of Steel Fiber Content

Effect of Notch Location on Flexural and Fracture Behaviors of UHPGC Notched Beam Based on Four-point Bending Test and Acoustic Emission Monitoring

Cracking characteristics evaluation for reinforcement basalt fiber reactive powder concrete beam using acoustic emission

Investigation of fatigue crack propagation behavior in steel fiber-reinforced ultra-high-performance concrete (UHPC) under cyclic flexural loading

Thermal-dependent brittleness effect of ultra-high performance concrete exposed to cryogenic flexural loads by acoustic emission evaluation

Experimental and Hybrid FEM/Peridynamic Study on the Fracture of Ultra-High-Performance Concretes Reinforced by Different Volume Fractions of Polyvinyl Alcohol Fibers

Analysis of the flexural properties of ultra-high-performance concrete consisting of hybrid straight steel fibers

Investigation of fracture mechanics, physical and dynamic properties of UHPCs containing PVA, glass and steel fibers

Flexural and cracking behaviors of reinforced UHPC beams with various reinforcement ratios and fiber contents

FRACTURE PARAMETERS STUDY AND APPLICATION OF ULTRA HIGH PERFORMANCE FIBER REINFORCEMENT CONCRETE

Triaxial strength and failure criterion of ultra-high performance concrete

Flexural and cracking performance of ultra-high performance concrete beams with high-strength steel reinforcements

Shear Fracture Performance of the Interface Between Ultra-High Toughness Cementitious Composites and Reactive Powder Concrete

Effect of steel fiber distribution on the mechanical properties of UHPC caused by vehicle-bridge coupling vibration

Study on dynamic properties of lightweight ultra-high performance concrete (L-UHPC)

The use of AE technique for identifying ductility degradation against cryogenic on flexural performance of UHPC at various temperature conditions

New Energy Dissipation Mechanisms for Steel Fiber Reinforcement in Ultra High-Performance Concrete