Abstract:To meet the stringent requirements of next-generation film capacitors for power electronics, multilayer films (MLFs) are fabricated with the advantage of achieving high temperature rating, high energy density, and reasonably low loss simultaneously. In this study, a high permittivity polar polymer, poly(vinylidene fluoride) (PVDF), is multilayered with a linear, low loss dielectric polymer such as high-temperature polycarbonate (HTPC). However, the dielectric loss of these MLFs was still high as compared with current state-of-the-art biaxially oriented polypropylene (BOPP) films. The goal of this work is to decrease the dielectric loss and enhance dielectric insulation by achieving flat-on primary PVDF crystals in MLFs via nanoconfined melt-recrystallization. Based on simultaneous small- and wide-angle X-ray scattering experiments, edge-on lamellar crystals were observed for all as-extruded MLFs, regardless of different PVDF layer thicknesses. However, after melting at 180 °C followed by recrystallization, flat-on primary crystals were successfully achieved when the PVDF layer thickness was below 39 nm. Above 78 nm for the PVDF layer, major edge-on primary crystals with minor flat-on secondary crystals were observed. From leakage current, breakdown, lifetime, and electric displacement-electric field loop studies, MLFs with the flat-on primary crystals exhibited reduced loss and enhanced dielectric insulation as compared to as-extruded MLFs and those with edge-on primary/flat-on secondary crystals. This was attributed to the effective blockage of charge carriers by the flat-on PVDF primary crystals and their reduced ferroelectric switching.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c15457?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c15457</a>.Melt viscosities of HTPC and PVDF, dielectric lifetime measurement scheme, 1D SAXS profiles, ATR FTIR and FESEM characterization results, DSC curves, frequency-scan BDS results for as-extruded and melt-recrystallized HTPC/PVDF 256L films, leakage current results for the HTPC/PVDF 256L films at various electric fields and temperatures (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c15457/suppl_file/am0c15457_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Development of thermoplastic films via formulation design technology for millimeter-wave communication applications

Branched Thermotropic Liquid Crystal Polymer with Favourable Processability and Dielectric Properties

Polyimide Films with Liquid‐Crystal‐Like Structures: Toward Ultralow Dielectric Loss at High Frequencies

Fluorine-terminated functionalized liquid metal/silicon carbide binary nanoparticles for polyvinyl alcohol composite films with high in-plane thermal conductivity and ultra-low dielectric constant

Flexible Liquid Crystal Polymer Technologies from Microwave to Terahertz Frequencies

Achieving Flat-on Primary Crystals by Nanoconfined Crystallization in High-Temperature Polycarbonate/Poly(vinylidene fluoride) Multilayer Films and Its Effect on Dielectric Insulation

Confined Crystallization Polyether-Based Flexible Phase Change Film for Thermal Management

Low—Permittivity Copolymerized Polyimides with Fluorene Rigid Conjugated Structure

Blow molding liquid crystal aromatic polyester/polyetherimide film by rotating die: Enhanced film bubble stability and mechanical properties

Broadband Millimeter-Wave Dielectric Properties of Liquid Crystal Polymer Materials

High Thermal Conductivity and Low Dielectric Constant of Polyesters Based on Fluorine and Mesogenic Unit

Polyimide films with ultralow dielectric loss for 5G applications: Influence and mechanism of ester groups in molecular chains

Performance of heat-resisting functional polypropylene/hollow silica substrates for 6th generation wireless communication

Poly(ether ketone ketone)/hollow silica filler substrates and application for sixth generation communication

Thermoplastic Polyimide with Low Dielectric Properties Enabled by the 2,2′-Spirobifluorene Group

Highly Transparent and Colorless Polyimide Film with Low Dielectric Constant by Introducing Meta-substituted Structure and Trifluoromethyl Groups

Multifunctional PPy/MXene decorated polylactic acid film for thermal management and electromagnetic interference shielding

Structural Designs of Transparent Polyimide Films with Low Dielectric Properties and Low Water Absorption: A Review

Ductile Polymer-Based Films with Ultrahigh Permittivity and Low Dielectric Loss

Development of new dielectric material to reduce transmission loss