Abstract:Safety of lithium-ion batteries under mechanical loadings is currently one of the most challenging and urgent issues facing in the Electric Vehicle (EV) industry. The architecture of all types of large-format automotive batteries is an assembly of alternating layers of anode, separator, and cathode. The anode is composed of a very thin copper foil double-side coated with graphite powders, while the cathode is an aluminum foil with the active material coating. Each of the five components may develop a large plastic deformation until fracture. This study focuses on the effect of the properties of the coated materials on the local and global responses of a battery cell. Both anode and cathode coatings are described by the Drucker-Prager/Cap plasticity model, which is carefully calibrated through axial and lateral compression tests and closed-die compaction test. A separate experimental effort is put on finding the strength of the interface between the foils and the granular materials with a binder. The main new finding is that in the cases of plane-strain and axisymmetric loadings, the failure of cells proceeds in two stages. First, the shear bands localize along discrete lines. Then, fracture develops inside the shear bands due to large local strain gradient. The present model is applied to study the deformation and strength of large-format pouch cells subjected to local indentations by rigid punches. The prediction of the present model follows closely the measured load-displacement curve and captures with good accuracy the magnitude of the peak load and the corresponding critical displacement. In addition, an excellent correlation is achieved between the calculated profile of the through-thickness crack and the result of the micro CT scan. The present detailed computational model should be useful in the battery design process and will serve as an important new computational tool for assessing the safety of lithium-ion batteries against mechanical loading.

Defect Engineering in a Multiple Confined Geometry for Robust Lithium–Sulfur Batteries

Defect Engineering for Expediting Li–S Chemistry: Strategies, Mechanisms, and Perspectives

Defect Engineering on Electrode Materials for Rechargeable Batteries

Defect Strategy in Solid‐State Lithium Batteries

Defect Chemistry in High‐Voltage Cathode Materials for Lithium‐Ion Batteries

Defect Chemistry: Defect Chemistry in Discharge Products of Li-O<sub>2</sub> Batteries (Small Methods 3/2019)

Dual‐Defect Engineering of Bidirectional Catalyst for High‐Performing Lithium‐Sulfur Batteries (Small 40/2023)

Defect-Rich Multi-shelled Fe-doped Co3O4 Hollow Microspheres with Multiple Spatial Confinements to Facilitate Catalytic Conversion of Polysulfides for High-Performance Li-S Batteries.

Defects Engineering of Lightweight Metal–Organic Frameworks-Based Electrocatalytic Membrane for High-Loading Lithium–Sulfur Batteries

Defect engineering of molybdenum disulfide for energy storage

Twin Boundary Defect Engineering Improves Lithium-Ion Diffusion for Fast-Charging Spinel Cathode Materials.

A Combined Ordered Macro‐Mesoporous Architecture Design and Surface Engineering Strategy for High‐Performance Sulfur Immobilizer in Lithium–Sulfur Batteries

Simultaneous dual-defect engineering as a booster for polysulfide adsorption and conversion in Li-S battery

Molecular Engineering toward Robust Solid Electrolyte Interphase for Lithium Metal Batteries (Adv. Mater. 14/2024)

Interfacial Modification, Electrode/Solid-Electrolyte Engineering, and Monolithic Construction of Solid-State Batteries

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure

Synergistic Defect Engineering and Interface Stability of Activated Carbon Nanotubes Enabling Ultralong Lifespan All-Solid-State Lithium-Sulfur Batteries

Ultrathin Conductive Interlayers: Ultrathin Conductive Interlayer with High‐Density Antisite Defects for Advanced Lithium–Sulfur Batteries (Adv. Funct. Mater. 2/2021)

Defect Chemistry in Discharge Products of Li-O-2 Batteries

Defect-engineered bilayer MOFs separator for high stability lithium-sulfur batteries