Abstract:Polysulfide dissolution is one of the inherent challenges in lithium–sulfur batteries (LSBs). The shuttle effect of soluble polysulfide species between the cathode and the anode can cause the loss of active materials and the attenuation of specific capacity in LSBs. Herein, the N-doped porous carbon (NC) nanosheets with uniformly anchored defect-rich MoS2 nanosheets (MoS2/NC) were constructed by a simple and low-cost method. The NC nanosheets facilitate transfer of lithium ion and electron and localize polysulfides via the Li–N chemical bond. The defect-rich MoS2 nanosheets can be used as electrocatalysts to propel polysulfide conversion by abundant catalytic activity sites and thus control the shuttle effect as well as improve cycling performances of LSBs. Consequently, the defect-rich MoS2/NC composites as separator modification present a high specific capacity of 1021 mAh g–1 at 0.2 C after 100 cycles and superior long-term performances with enhanced specific capacities of 429 mAh g–1 with a low capacity fading rate of 0.027% per cycle at 5 C after 1000 cycles. The reasonable construct strategy of defect-rich MoS2/NC composites is effective in enhancing the electrochemical performances of LSBs and promoting their commercial applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c03887?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c03887</a>.Experimental section, SEM images of as-prepared pure MoS2, XRD pattern of NC nanosheets, and galvanostatic charge/discharge profiles of cells (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c03887/suppl_file/sc0c03887_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Defects Engineering of Lightweight Metal–Organic Frameworks-Based Electrocatalytic Membrane for High-Loading Lithium–Sulfur Batteries

Defect-Rich Multi-shelled Fe-doped Co3O4 Hollow Microspheres with Multiple Spatial Confinements to Facilitate Catalytic Conversion of Polysulfides for High-Performance Li-S Batteries.

Defects-Rich Single Atom Catalyst Enhanced Polysulfide Conversion Kinetics for Upgrading Performance of Li-S Batteries

Defect-Rich Amorphous Iron-Based Oxide/Graphene Hybrid-Modified Separator toward the Efficient Capture and Catalysis of Polysulfides

Manipulating Electrocatalytic Li 2 S Redox via Selective Dual‐Defect Engineering for Li–S Batteries

Manipulating Electrocatalytic Li<sub>2</sub>S Redox via Selective Dual-Defect Engineering for Li-S Batteries

A Combined Ordered Macro‐Mesoporous Architecture Design and Surface Engineering Strategy for High‐Performance Sulfur Immobilizer in Lithium–Sulfur Batteries

Quantitative defect regulation of heterostructures for sulfur catalysis toward fast and long lifespan lithium-sulfur batteries

An ultralight electroconductive metal-organic framework membrane for multistep catalytic conversion and molecular sieving in lithium-sulfur batteries

Propelling Polysulfide Conversion by Defect-Rich MoS2 Nanosheets for High-Performance Lithium-Sulfur Batteries

Synergizing Spatial Confinement and Dual‐Metal Catalysis to Boost Sulfur Kinetics in Lithium–Sulfur Batteries

Multi-ion Modulated Single-Step Synthesis of a Nanocarbon Embedded with a Defect-Rich Nanoparticle Catalyst for a High Loading Sulfur Cathode.

Defect-engineered bilayer MOFs separator for high stability lithium-sulfur batteries

Defective TiO2-graphene heterostructures enabling in-situ electrocatalyst evolution for lithium-sulfur batteries

Ion-Selective Covalent Organic Framework Membranes as a Catalytic Polysulfide Trap to Arrest the Redox Shuttle Effect in Lithium–Sulfur Batteries

Design of Quasi‐MOF Nanospheres as a Dynamic Electrocatalyst toward Accelerated Sulfur Reduction Reaction for High‐Performance Lithium–Sulfur Batteries

Constructing Defect-Rich MoS 2 /N-Doped Carbon Nanosheets for Catalytic Polysulfide Conversion in Lithium–Sulfur Batteries

Creating Edge Sites within the 2D Metal‐Organic Framework Boosts Redox Kinetics in Lithium–Sulfur Batteries

Facilitation polysulfides adsorption/catalysis by nitrogen/phosphorous co-doped carbon nanofibers networks for advanced lithium/polysulfides batteries

Ordered Mesoporous Carbon Grafted MXene Catalytic Heterostructure As Li-Ion Kinetic Pump Toward High-Efficient Sulfur/Sulfide Conversions for Li-S Battery

Thiol-Containing Metal-Organic Framework-Decorated Carbon Cloth as an Integrated Interlayer-Current Collector for Enhanced Li-S Batteries