Abstract:With the recent progresses on the designing and manufacturing of lightweight and high engineering current density superconducting cables, the need for an established, fast, and sufficiently accurate computational model for the forecasting of AC-losses in cold-dielectric conductors, is pivotal for increasing the investment confidence of power grid operators. However, validating such models is not an easy task, this because on the one hand, there is a low availability of experimental results for large scale power cables and, on the other hand, there is a large number of 2G-HTS tapes involved whose cross-sectional aspect ratio hinders the numerical convergence of the models within reasonable delivery times. Thus, aiming to overcome this challenge, we present a detailed two-dimensional H-model capable to reproduce the experimentally measured AC-losses of multi-layer power cables made of tens of 2G-HTS tapes. Two cable designs with very high critical currents have been considered, the first rated at 1.7 kA critical current, consisting of fifty 4 mm width 2G-HTS tapes, these split in 5 concentric layers wound over a cylindrical former, with the three inner layers forming an arrangement of 24 tapes shielded by two further layers with 13 tapes each. This cable is contrasted with a size wise equivalent cable with 67 superconducting tapes rated at 3.2 kA critical current, whose design implies the use of 40 tapes of 3 mm width split within four core layers, and 27 tapes of 4 mm width distributed in two shielding layers. In both situations a remarkable resemblance between the simulations and experiments has been found, rendering to acceptable estimates of the AC-losses for cold dielectric conductors, and offering a unique view of the local electrodynamics of the wound tapes where the mechanisms of shielding, magnetization, and transport currents can coexist within the hysteretic process.

Optimization of the Terminations of an HTS Cable Operating on a DC Railway Network

Research on Structure Optimization of Cold Dielectric High-Temperature Superconducting Cables

Steady-state Electrical Properties and Loss Reduction Measures Analysis for 220 Kv Tunnel Cable System

Sheath Loss Calculation and Loss Reduction Analysis of 220 Kv Cable System

Investigation on Loss Reduction Strategies of Single-Core HVAC Submarine Cables

A Review on Insulation and Dielectrics for High- Temperature Superconducting Cables for Power Distribution: Progress, Challenges, and Prospects

Investigation on Steady State Characteristics and Loss Reduction Measures of 220 Kv Power Cables

Analysis of Thermo-electric Coupled Simulation for 10 Kv AC XLPE Cable under Different DC Topologies and Laying Modes

An Investigation on Grounding System of AC Single-core Submarine Cable Based on Multi-conductor Analysis Theory

Transient Analysis of HVDC HTS Cable in Power Grid Using Discretized Electrical-Thermal Model

Optimization methods for HTS DC and AC cables with longitudinal magnetic field effect

Design and Economic Analysis of 275 kV HTS Cable for UK Transmission Network

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission

Numerical Analysis on the Current Distribution and the Loss in HTS Stacked Tapes Considering Termination Resistances

Towards Electrothermal Optimization of a HVDC Cable Joint Based on Field Simulation

Multi-Objective Optimization for Improving Weight and Fault Characteristics of a DC HTS Cable in Cryo-Electric Aircraft

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

Practical Forecasting of AC Losses in Multi-layer 2G-HTS Cold Dielectric Conductors

AC Loss Analysis of 35-kV Superconducting Cables Operating at Full Load

Computational Modelling of Russia's First 2G-HTS Triaxial Cable