Abstract:Accessories such as joints and terminations represent weak points in HVDC cable systems. The DC field distribution is intimately dependent on the thermal conditions of the accessory and on material properties. Moreover, there is no available method to probe charge distribution in these conditions. In this work, the field distribution in non-stationary conditions, both thermally and electrically, is computed considering crosslinked polyethylene (XLPE) as cable insulation and different insulating materials (silicone, rubber, XLPE) for a 200 kV joint assembled in a same geometry. In the conditions used, i.e., temperatures up to 70 °C, and with the material properties considered, the dielectric time constant appears of the same order or longer than the thermal one and is of several hours. This indicates that both physical phenomena need to be considered for modelling the electric field distribution. Both the radial and the tangential field distributions are analysed, and focus is given on the field distribution under the stress cone on the ground side and near the central deflector on the high voltage side of the joint. We show that the position of the maximum field varies in time in a way that is not easy to anticipate. Under the cone, the smallest tangential field is obtained with the joint insulating material having the highest electrical conductivity. This results from a shift of the field towards the cable insulation in which the geometrical features produce a weaker axial component of the field. At the level of the central deflector, it is clear that the tangential field is higher when the mismatch between the conductivity of the two insulations is larger. In addition, the field grows as a function of time under stress. This work shows the need of precise data on materials conductivity and the need of probing field distribution in 3D.

Towards Electrothermal Optimization of a HVDC Cable Joint Based on Field Simulation

DC Electric Field Optimization of AC XLPE Cable Joint in DC Operation

Electric field calculation and optimization for stress cone of DC cable joint based on the coaxial double-layer insulation model

Electric field tailoring in HVDC cable joints utilizing electro-thermal simulation: effect of field grading materials

Analysis of Thermo-electric Coupled Simulation for 10 Kv AC XLPE Cable under Different DC Topologies and Laying Modes

Research on Structure Optimization of Cold Dielectric High-Temperature Superconducting Cables

Coupled Thermal-Electrical Analysis of 110 Kv Corrugated Aluminum Sheathed and Smooth Aluminum Sheath Cables Based on Finite Element Simulation Method

Electric Field Distribution in HVDC Cable Joint in Non-Stationary Conditions

A Generic Approach for HVDC Cable Accessories Modelling

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

Numerical analysis of thermo-electric field for 10 kV AC XLPE cable in DC operation

Simulation Study on Plugged Joint for 10kv Cable

Tuning of Potential Distribution in DC Cable Joints with Nonlinear Material

Numerical Analysis of Thermo-Electric Field for AC XLPE Cable in DC Operation Based on Conduction Current Measurement.

Charge Transport in Full-Size HVDC Cable Joint with Modeling of XLPE/EPDM Interface

Transient Nonlinear Electrothermal Adjoint Sensitivity Analysis for HVDC Cable Joints

Simulation Analysis of Electromagnetic and Heat Field Distribution in 330kv High Voltage AC Cable

Temperature Field Calculation and Thermal Circuit Equivalent Analysis of 110 kV Core Cable Joint

Simulation of Insulation Electric Field of HVDC XLPE Cable Based on Radial Non-uniform Conductivity Distribution

Optimization of the Terminations of an HTS Cable Operating on a DC Railway Network

Simulation of Thermal and Electrical Transient Field Distribution of a HVDC Cable Laid in a Tunnel