Abstract:With the recent progresses on the designing and manufacturing of lightweight and high engineering current density superconducting cables, the need for an established, fast, and sufficiently accurate computational model for the forecasting of AC-losses in cold-dielectric conductors, is pivotal for increasing the investment confidence of power grid operators. However, validating such models is not an easy task, this because on the one hand, there is a low availability of experimental results for large scale power cables and, on the other hand, there is a large number of 2G-HTS tapes involved whose cross-sectional aspect ratio hinders the numerical convergence of the models within reasonable delivery times. Thus, aiming to overcome this challenge, we present a detailed two-dimensional H-model capable to reproduce the experimentally measured AC-losses of multi-layer power cables made of tens of 2G-HTS tapes. Two cable designs with very high critical currents have been considered, the first rated at 1.7 kA critical current, consisting of fifty 4 mm width 2G-HTS tapes, these split in 5 concentric layers wound over a cylindrical former, with the three inner layers forming an arrangement of 24 tapes shielded by two further layers with 13 tapes each. This cable is contrasted with a size wise equivalent cable with 67 superconducting tapes rated at 3.2 kA critical current, whose design implies the use of 40 tapes of 3 mm width split within four core layers, and 27 tapes of 4 mm width distributed in two shielding layers. In both situations a remarkable resemblance between the simulations and experiments has been found, rendering to acceptable estimates of the AC-losses for cold dielectric conductors, and offering a unique view of the local electrodynamics of the wound tapes where the mechanisms of shielding, magnetization, and transport currents can coexist within the hysteretic process.

AC Loss Analysis of 35-kV Superconducting Cables Operating at Full Load

Investigation on Steady State Characteristics and Loss Reduction Measures of 220 Kv Power Cables

Sheath Loss Calculation and Loss Reduction Analysis of 220 Kv Cable System

Investigation on Loss Reduction Strategies of Single-Core HVAC Submarine Cables

Analysis of Thermo-electric Coupled Simulation for 10 Kv AC XLPE Cable under Different DC Topologies and Laying Modes

Steady-state Electrical Properties and Loss Reduction Measures Analysis for 220 Kv Tunnel Cable System

A Novel AC Loss Measurement Technology for High Temperature Superconducting Cable With Large Current Capacity Using a Compensation Coil

Ultra-low Electrical Loss Superconducting Cables for Railway Transportation: Technical, Economic, and Environmental Analysis

Numerical Analysis of Thermo-Electric Field for AC XLPE Cable in DC Operation Based on Conduction Current Measurement.

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

Optimization of the Terminations of an HTS Cable Operating on a DC Railway Network

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission

Electromagnetic characterization of high-temperature superconducting cables with partial tape faults

Numerical analysis of thermo-electric field for 10 kV AC XLPE cable in DC operation

Analysis of AC Transport Loss in Conductor on Round Core Cables

Practical Forecasting of AC Losses in Multi-layer 2G-HTS Cold Dielectric Conductors

Dielectric loss and partial discharge test analysis of 10 kV XLPE cable

Effect of Multilayer Configuration on Ac Losses of Superconducting Power Transmission Cables Consisting of Narrow Coated Conductors

Mathematical Modeling and Current Characteristics Investigation of a 35 Kv Three-in-One High Temperature Superconducting (HTS) Power Cable

High-Temperature Superconducting Cable Optimization Design Software Based on 2-D Finite Element Model

Study on properties test procedure for superconducting cables