Abstract:The high-precision integration of three-dimensional (3D) microoptical components into microfluidics in a customizable manner is crucial for optical sensing, fluorescence analysis, and cell detection in optofluidic applications; however, it remains challenging for current microfabrication technologies. This paper reports the in-channel integration of flexible two-dimensional (2D) and 3D polymer microoptical devices into glass microfluidics by developing a novel technique: flat scaffold-supported hybrid femtosecond laser microfabrication (FSS-HFLM). The scaffold with an optimal thickness of 1–5 µm is fabricated on the lower internal surface of a microfluidic channel to improve the integration of high-precision microoptical devices on the scaffold by eliminating any undulated internal channel surface caused by wet etching. As a proof of demonstration, two types of typical microoptical devices, namely, 2D Fresnel zone plates (FZPs) and 3D refractive microlens arrays (MLAs), are integrated. These devices exhibit multicolor focal spots, elongated (>three times) focal length and imaging of the characters ‘RIKEN’ in a liquid channel. The resulting optofluidic chips are further used for coupling-free white-light cell counting with a success rate as high as 93%. An optofluidic system with two MLAs and a W-filter is also designed and fabricated for more advanced cell filtering/counting applications. By fabricating microscale polymer lenses in hollow glass microchannels, scientists realize an optofluidic chip that detects and counts cells. This scheme works by employing a femtosecond laser to ‘grow’ by two-photon polymerization various three-dimensional optical structures, such as microlens arrays, on a flat polymer scaffold on the internal surface of a microfluidic channel. White light is then shone through the lenses and the presence of cells in the optical path is detected by a drop in light transmission. Dong Wu and co-workers from RIKEN’s Laser Technology Laboratory in Japan and Jilin University in China say that this fabrication approach could also prove useful for constructing a variety of active and passive micro-optic devices, such as optical switches, on-chip microlasers and amplifiers for lab-on-a-chip applications.

A compact low-cost low-maintenance open architecture mask aligner for fabrication of multilayer microfluidics devices

Femtosecond Laser Micromachining of the Mask for Acoustofluidic Device Preparation

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

A Low-Cost Fabrication System for Manufacturing Soft-Lithography Microfluidic Master Molds

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

In-Situ Bonding of Multi-Layer Microfluidic Devices Assisted by an Automated Alignment System

Rapid Prototyping of Organ-on-a-Chip Devices Using Maskless Photolithography

Homebrew Photolithography for the Rapid and Low-Cost, "Do It Yourself" Prototyping of Microfluidic Devices

Development Of A Compact And Cost Effective Msl System Based On A Compliant Nanomanipulator

Making Healthcare Accessible: A Rapid Clean-Room-Free Fabrication Strategy for Microfluidics-Driven Biosensors Based on Coupling Stereolithography and Hot Embossing

Multi-Resin Masked Stereolithography (MSLA) 3D Printing for Rapid and Inexpensive Prototyping of Microfluidic Chips with Integrated Functional Components

Prototyping of Masks, Masters, and Stamps/molds for Soft Lithography Using an Office Printer and Photographic Reduction

Rapid Micromolding of Sub-100 µm Microfluidic Channels Using an 8K Stereolithographic Resin 3D Printer

A simple method for producing freestanding 3D microstructures by integrated photomask micromolding

Towards automated micromachining of PMMA micro channels using CO2 laser and sacrificial mask process

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Rapid Manufacturing of Multilayered Microfluidic Devices for Organ on a Chip Applications

Achieving High-Precision, Low-Cost Microfluidic Chip Fabrication with Flexible PCB Technology

In-channel Integration of Designable Microoptical Devices Using Flat Scaffold-Supported Femtosecond-Laser Microfabrication for Coupling-Free Optofluidic Cell Counting

Efab: Low-Cost Automated Electrochemical Batch Fabrication Of Arbitrary 3-D Microstructures

Fabrication of Micro/nano Fluidic System Combining Hybrid Mask-Mould Lithography with Thermal Bonding