Abstract:Wide bandgap (WBG) devices offer the advantages of high frequency, high efficiency, and high power density to power converters due to their excellent performance. However, their low parasitic capacitance and fast switching speed also make them more susceptible to switching oscillations. The switching oscillations can cause voltage and current overshoots, shoot-through, electromagnetic interference, additional power loss, and even device damage, which can seriously affect the performance of power converters and systems. However, a comprehensive and in-depth overview is lacking on this topic. This article reviews the types, the causes and negative effects, the effects of parasitic parameters and suppression methods of these switching oscillations, which is helpful for practical engineering. First, the switching oscillations are divided into different types, and their causes and negative effects are reviewed. Then, the effects of different parasitic parameters on the switching oscillations are overviewed. It is found that due to the different physical structures of silicon carbide metal-oxide-semiconductor field-effect transistors, enhancement-mode gallium nitride high-electron mobility transistors (eGaN HEMTs), and cascode GaN HEMTs, the effects are also different. Finally, the main methods of suppressing the switching oscillations are summarized, and the advantages and disadvantages of these methods are presented. Furthermore, future research works on this topic and the conclusion of this paper are drawn, which will help readers deepen their understanding of the switching oscillations of WBG devices, and inspire readers to better use WBG devices for high-frequency and high-efficient power conversion.

Mechanism Analysis and Oscillation Suppression of the False Triggering Oscillation for Parallel-Connected GaN Devices

Analysis and Suppression for Gate Oscillation Caused by Body Diodes on Paralleled SiC MOSFETs Application

Analysis and Suppression of High Speed Dv/Dt Induced False Turn-on in GaN HEMT Phase-Leg Topology

A Normalized Quantitative Method for GaN HEMT Turn-ON Overvoltage Modeling and Suppressing

An Improved Analytical Model of GaN HEMT in Cascode Configuration During Turn-on Transition

Design Analysis of Novel Substrate-Triggered GGNMOS in 65nm CMOS Process

Turn-on Oscillation Damping for Hybrid IGBT Modules

A Review of Switching Oscillations of Wide Bandgap Semiconductor Devices

Switching Transient Analysis for Normally-off GaN Transistors with P-Gan Gate in a Phase-Leg Circuit

Comprehensive Analysis of Paralleled SiC MOSFETs Current Imbalance under Asynchronous Gate Signals

Dynamic Current Balancing for Paralleled SiC MOSFETs with Circuit Mismatches Considering Circulating C Urrent in Drive Circuit

The Mechanism of Short-Circuit Oscillations in Automotive-Grade Multi-Chip Parallel Power Modules and an Effective Mitigation Approach

Virtual Prototype and GaN HEMT Based High Frequency LLC Converter Design

Analytical Model and Safe-Operation-Area Analysis of Bridge-Leg Crosstalk of GaN E-HEMT Considering Correlation Effect of Multi-Parameters

Mechanism Analysis and Suppression Strategies of Power Oscillation for Virtual Synchronous Generator.

Active Gate Driver for Dynamic Current Balancing of Parallel-Connected SiC MOSFETs

An Active Gate Driver Design to Reduce Voltage and Current Overshoots for SiC MOSFET Modules

Optimization Study for the Influence of Parasitic Parameters in Aerospace Power Supply Based on GaN

A comprehensive study on the gate-loop stability of the SiC MOSFET

Design and Analysis of GaN-Based Parallel Flyback Circuit

On-Chip Concurrent Device Aging Prognosis and Dielectric Failure Detection for GaN Power Devices