Abstract:Herein, we fabricated nanoscale 2D CeO2sheet structure to develop a stable resistive gas sensor for detection of low concentration (ppm) level formaldehyde vapors. The fabricated CeO2nanosheets (NSs) showed an optical band gap of 3.53 eV and cubic fluorite crystal structure with enriched defect states. The formation of 2D NSs with well crystalline phases is clearly observed from high-resolution transmission electron microscope (HRTEM) images. The NSs have been shown tremendous blue-green emission related to large oxygen defects. A VOC sensing device based on fabricated two-dimensional NSs has been developed for the sensing of different VOCs. The device showed better sensing for formaldehyde compared with other VOCs (2-propanol, methanol, ethanol, and toluene). The response was found to be 4.35, with the response and recovery time of 71 s and 310 s, respectively. The device showed an increment of the recovery time (71 s to 100 s) with the decrement of the formaldehyde ppm (100 ppm to 20 ppm). Theoretical fittings provided the detection limit of formaldehyde ≈8.86 ± 0.45 ppm with sensitivity of 0.56 ± 0.05 ppm-1. The sensor device showed good reproducibility with excellent stability over the study period of 135 d, with a deviation of 1.8% for 100 ppm formaldehyde. The average size of the NSs (≈24 nm) calculated from HRTEM observation showed lower value than the calculated Debye length (≈44 nm) of the charge accumulation during VOCs sensing. Different defect states, interstitial and surface states in the CeO2NSs as observed from the Raman spectrum and emission spectrum are responsible for the formaldehyde sensing. This work offers an insight into 2D semiconductor-based oxide material for highly sensitive and stable formaldehyde sensors.

Ultrathin CeO2 nanosheets as bifunctional sensing materials for humidity and formaldehyde detection

Emerging 2D nanoscale metal oxide sensor: semiconducting CeO2nano-sheets for enhanced formaldehyde vapor sensing

Ultrathin SnO2 Nanosheets with Dominant High-Energy {001} Facets for Low Temperature Formaldehyde Gas Sensor

Novel insights into the unique intrinsic sensing behaviors of 2D nanomaterials for volatile organic compounds: from graphene to MoS<sub>2</sub> and black phosphorous

High-sensitivity formaldehyde gas sensor based on Ce-doped urchin-like SnO2 nanowires derived from calcination of Sn-MOFs

Synthesis and Characterization of 1-D Cerium Oxide to Study Their Humidity Sensing Application

Ultra-fast and highly selective room-temperature formaldehyde gas sensing of Pt-decorated MoO3 nanobelts

Ultra-thin CoAl layered double hydroxide nanosheets for the construction of highly sensitive and selective QCM humidity sensor

Formaldehyde Sensing by Co3O4 Hollow Spheres at Room Temperature

Humidity-tolerant sensing performance of NiO/SnO2 material for quick formaldehyde detection

In Situ Self-Oxidation of Few-Layered Nb 2 CT x Nanosheets in Aqueous Solution for Achieving Improved Humidity Sensitivity and Selectivity

Highly sensitive formaldehyde sensors based on CuO/ZnO composite nanofibrous mats using porous cellulose acetate fibers as templates

Morphology-controlled synthesis of CeO2 nanocrystals and their facet-dependent gas sensing properties

Ordered Arrays of Bead-Chain-like In<sub>2</sub>O<sub>3</sub>Nanorods and Their Enhanced Sensing Performance for Formaldehyde

2D/2D Dy 2 O 3 Nanosheet/MoO 3 Nanoflake Heterostructures for Humidity-Independent and Sensitive Ammonia Detection

Enhanced Formaldehyde-Sensing Performances of Mixed Polyethyleneimine-Multiwalled Carbon Nanotubes Composite Films on Quartz Crystal Microbalance

Nanoporous Mixed-Phase In 2 O 3 Nanoparticle Homojunctions for Formaldehyde Sensing

Facile synthesis of CaFe2O4 nanocubes for formaldehyde sensor

Fabrication of a humidity-resistant formaldehyde gas sensor through layering a molecular sieve on 3D ordered macroporous SnO2 decorated with Au nanoparticles

Rational design of CuO/In2O3 heterostructures with flower-like structures for low temperature detection of formaldehyde

Ultrasensitive HCHO sensor based on Cr-doped cerium oxide nanoparticles with full recoverability and decisive anti-humidity ability