Abstract:Several key issues related to the efficiency and reliability of thermoelectric modules based on nanostructured PbTe are addressed. High temperature material stability and mechanical properties in p‐type PbTe are improved while maintaining a high figure of merit zT by tuning dopant Na content. The degradation behavior of p‐ and n‐type PbTe‐based thermoelectric elements are investigated through long‐term power generation tests. Material stability and mechanical properties of nanostructured p‐type Pb0.993−xNaxGe0.007Te (x = 0.02, 0.04) are improved by tuning dopant Na content, while maintaining a high thermoelectric figure of merit zT. Na‐rich impurity phases detrimental to the material stability, present in heavily Na‐doped p‐type PbTe, are absent after reducing the Na doping from 4% to 2%. The flexural strength of 2% Na‐doped p‐type PbTe measured at 773 K is significantly improved compared to that of the 4% Na‐doped p‐type PbTe, but lower than that of n‐type Pb0.98Ga0.02Te measured in comparison. Excellent thermoelectric performance is maintained for nanostructured Pb0.973Na0.02Ge0.007Te (zT ≈ 2.2 at 810 K). For n‐type Pb0.98Ga0.02Te, zT ≈ 1.3 at 760 K is confirmed. Single‐leg elements of Pb0.973Na0.02Ge0.007Te and Pb0.98Ga0.02Te with Co80Fe20 contact layers display maximum conversion efficiency ηmax ≈ 8.4% and ηmax ≈ 8.2% for temperature difference ΔT ≈ 470 K, respectively. After 240 h operation with ΔT ≈ 470 K, ηmax decreases by ≈33% for the p‐type and ≈13% for the n‐type legs. Lower ηmax compared to the estimation from the material properties and degradation during operation are attributed to crack formation due to thermal expansion mismatch between PbTe and Co80Fe20 and sublimation from the hot side.

Enhanced thermal stability and oxidation resistance in La3-Te4 by compositing metallic nickel particles

Thermoelectric Performance Optimization of n-Type La3−xSmxTe4/Ni Composites via Sm Doping

High-temperature thermoelectric properties with Th$_{3-x}$Te$_4$

Enhancement of thermoelectric properties of SrTiO3/LaNb–SrTiO3 composite by different doping levels*

First-principles Calculations and High Thermoelectric Performance of La–Nb Doped SrTiO3ceramics

Record High Thermoelectric Performance in Bulk SrTiO3 Via Nano-Scale Modulation Doping

High thermoelectric properties of P-SiGe/Sr0.9La0.1Ti0.9-xZrxNb0.1O3 composite

Ni barrier in Bi2Te3-based thermoelectric modules for reduced contact resistance and enhanced power generation properties

Enhanced thermoelectric performance in n-type SrTiO3/SiGe composite.

Processing bulk insulating CaTiO3 into a high-performance thermoelectric material

Enhanced Contact Performance and Thermal Tolerance of Ni/Bi2Te3 Joints for Bi2Te3-Based Thermoelectric Devices

Hierarchical Low-Temperature n-Type Bi2Te3 with High Thermoelectric Performances

Achieving High‐Performance Ge 0.92 Bi 0.08 Te Thermoelectrics via LaB 6 ‐Alloying‐Induced Band Engineering and Multi‐Scale Structure Manipulation

Achieving High-Performance Ge<sub>0.92</sub>Bi<sub>0.08</sub>Te Thermoelectrics via LaB<sub>6</sub>-Alloying-Induced Band Engineering and Multi-Scale Structure Manipulation

Fabrication and Excellent Performances of Bismuth Telluride-Based Thermoelectric Devices.

Improved thermoelectric properties in (1-x)LaCoO3/(x)La0.7Sr0.3CoO3 composite

Improved contact performance and thermal stability of Co–Ni alloy barrier layer for bismuth telluride-based thermoelectric devices

Preparation of novel titanium-niobium-oxygen composite ceramic with excellent thermoelectric properties using the high-pressure and high-temperature method

Improved High‐Temperature Material Stability and Mechanical Properties While Maintaining a High Figure of Merit in Nanostructured p‐Type PbTe‐Based Thermoelectric Elements

Tellurium Surface Doping to Enhance Structural Stability and Electrochemical Performance of Layered Ni-rich Cathode.

Enhanced thermoelectric performance of Bi0.3Sb1.7Te3 based alloys by dispersing TiC ceramic nanoparticles