Abstract:Impact-ionization wave triggering of a thyristor enables it to switch significantly higher currents with much faster rise times ($ ext{d}I / ext{d}t$ ) than through conventional triggering; indeed tests on commercial components demonstrate that both current and $ ext{d}I / ext{d}t$ can be increased an order of magnitude over their specified datasheet values by utilizing impact ionization. However, creating an impact ionization wave places stringent requirements on the generator used to trigger the thyristor—particularly the trigger pulse must have a voltage rise rate ($ ext{d}V / ext{d}t$ ) of more than 1 kV/ns and an amplitude over twice the thyristors static breakdown voltage. Given the capacitance of a thyristor is relatively large, often hundreds of pF, this is difficult to achieve with many common triggering methods. In this study, we present a bespoke, cost-effective, trigger generator that has been developed based on spiral/vector inversion techniques coupled to an optimized sharpening circuit. Using this generator, both a 2-kV single thyristor and a 4-kV stack of two thyristors in series were triggered in the impact-ionization mode. The thyristors had a wafer diameter of 32 mm and capacitances of 370 pF. With a single thyristor 100 shots were performed with it switching a peak current of 1.25 kA and an associated $ ext{d}I / ext{d}t$ of 12 kA/$mu ext{s}$ . With two thyristors, peak currents of 2.6 kA and with $ ext{d}I / ext{d}t$ of 25 kA/$mu ext{s}$ were achieved. In all experiments no degradation of the semiconductor structure was observed. The work opens the way for developing very powerful, but still compact, solid-state trigger generators and larger pulsers for a wide range of pulsed power applications.

A Novel Trigger Method for Reversely Switched Dynistor to Eliminate Residual Voltage in Submicrosecond Pulse Range

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Minimizing Multiple Triggering Effect in Diode-Triggered Silicon-Controlled Rectifiers for ESD Protection Applications

Pulsed Corona Generation Using a High-Power Semiconductor Diode Switch

A Novel Technique to Suppress Multiple-Triggering Effect in Typical DTSCRs under ESD Stress

Low-leakage Diode-Triggered Silicon Controlled Rectifier for Electrostatic Discharge Protection in 0.18-Μm CMOS Process

Investigation of the Trigger Voltage Walk-In Effect in Ldmos for High- Voltage Esd Protection

A Low-Jitter Self-Triggered Spark-Discharge Pre-Ionization Switch: Primary Research on Its Breakdown Characteristics and Working Mechanisms

Research on Conduction Delay Time Characteristics of Double-Gap Surface Flashover Triggered Multistage Vacuum Switch

Novel Diode-Triggered SCR with Suppressed Multiple Triggering for ESD Applications

Design Analysis of a Novel Low Triggering Voltage Dual Direction SCR ESD Device in 0. 18μm Mixed Mode RFCMOS Technology

A Novel Insulated Gate Trigger Thyristor Integrated with Gate Transient Voltage Suppressor for Ultrahigh di/dt Pulse Switching

Influence of Trigger Pulse on the Trigger Characteristics of Surface Flashover Trigger Vacuum Switch

A Three-Electrode Gas Switch Triggered by Microhollow Cathode Discharge with Low Trigger Voltage

A Self-Biased Triggered Dual-Direction Silicon-Controlled Rectifier Device for Low Supply Voltage Application-Specific Integrated Circuit Electrostatic Discharge Protection

Transient Voltage Suppressor Based on Diode-Triggered Low-Voltage Silicon Controlled Rectifier

2-kV Thyristor Triggered in Impact-Ionization Wave Mode by a Solid-State Spiral Generator

Voltage Coupling Enhancement for Transient Gate Overvoltage Suppression of Insulated Gate Trigger Thyristor in Ultrahigh di/dt Pulse Applications

A Novel Dual-Directional DTSCR in Twin-Well Process for Ultra-Low-voltage ESD Protection

A novel straight through-MOS-triggered SCR for on-chip ESD protection