Abstract:The shaft resistance of rock-socketed piles (RSPs) is primarily influenced by the interactions between the pile, rock and any soft interface materials. This study presents a fundamental experimental and numerical investigation to predict the shaft resistance of model RSPs in soft rocks through a comprehensive shear strength framework incorporating the major variables such as roughness and smear fabric. By calibrating the Discrete Element Method (DEM) results with the experimental outcomes, this study evaluates the load-resistance attributes of RSPs in three different soft rocks for a wide range of roughness and smear configurations. The interface roughness effect of the RSPs in terms of the friction coefficient was correlated with the ultimate shaft resistances, uniaxial compressive strength and Young's modulus of the rock. The study then incorporated the effect of smear fabric (placement, thickness and area proportion) in the shear strength framework of clean shafts. Comprehensive review of the DEM results revealed that the socket roughness effect diminishes at a critical roughness factor of 0.4, beyond which the smear predominantly influences the shaft capacity. Following this, the effects of roughness and smear fabric were incorporated into a single equation representing the interface shear strength of RSPs, where the existence of smear results in a maximum reduction of up to 75% of the ultimate shaft resistance. The distinctive feature of this unified interface shear strength framework lies in its integration of the new smear fabric parameter and the linkage to the mechanical properties of soft rocks, which is the limitation of the earlier studies. It thereby sets a strong base for future studies aimed at advancing the pile-rock interface models.

Experimental and Empirical Study on Piles Socketed Into the Rock

Advanced laboratory investigation of axial cyclic loading in silica sands

A New and Openly Accessible Database of Tests on Piles Driven in Sands

Design Method Reliability Assessment from an Extended Database of Axial Load Tests on Piles Driven in Sand

Model studies on effect of pseudo-rock-socket strength on resistance of friction-only piles

Soil-pile interaction on an instrumented pile under cyclic axial loads in sand

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Experimental Studies on Precast Prestressed Concrete Pile to Cip Concrete Pile-Cap Connections

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Experimental Studies on Seismic Behavior of Steel Pile-to-Pile-Cap Connections

Model Test Study of Bearing Behavior of Small Prefabricated Piles in Soft Soil Area

Study on Behavior and Bearing Capacity Computation Method of Shallow Rock-Socketed Short Piles Based on the Self-Balanced Loading Test

Vertical bearing capacity of rock-socketed pile with enlargement at pile end

Field tests of large-diameter rock-socketed bored piles based on the self-balanced method and their resulting load bearing characteristics

Study on Socket Length of Rock-Socketed Piles in Soft Soil Ground

Study on the Uplift Bearing Capacity of Rock-Socketed Piles

Bearing Behaviors of Rock-Socketed Piles in Layered Dynamically Compacted Soil-Rock Mixtures: A Case Study

Advancing Rock-Socketed Pile Design with a Unified Interface Shear Strength Framework for Soft Rocks

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Nonlinear analysis of ultimate bearing capacity of rock socketed pile

Vertical compressive bearing performance and optimization design method of large-diameter manually-excavated rock-socketed cast-in-place piles