Abstract:Belled piles are increasingly being employed for transmission tower foundations in the mountainous regions of Western China, but their uplift behavior is not fully understood. This paper presents experimental investigations of the pull-out behavior of belled piles in horizontal and inclined ground (overlying soil and underlying soft rock). 3D non-linear finite element analyses related to the model tests were also conducted using ABAQUS software, and the influence of slope effect on the ultimate uplift capacity of rock-socketed belled piles was evaluated. The results demonstrated that the inclined ground led to deterioration in its uplift performance, thus increasing both the displacement of the pile cap and ground surface. When the slope angle changes between 0° and 30°, the weakening effect of the slope on the ultimate uplift capacity increases linearly. When the slope angle is increased to 45°, the weakening effect of the slope on the ultimate uplift capacity is greatly enhanced, and the relationship between the ultimate uplift capacity of belled piles in the inclined ground and the slope angle is proposed. Moreover, the failure mode of the horizontal bedrock is an inverted cone with a failure angle between 0.8 and 1.0 φ r ( φ r is the internal friction angle of bedrock). In contrast, the bedrock failure of inclined ground is bulb-shaped, and it mainly occurs within 4 d ( d represents pile diameter) of the downslope side. It was also discovered that the downslope side of the belled pile in the sloped ground generated cracks that directed to the pile axis if the pile top load reached 82.3% of the ultimate uplift capacity. These findings are valuable for practicing engineers in the rational design of belled piles, taking account of the weakening effect of inclined ground.

Study on the Uplift Bearing Capacity of Rock-Socketed Piles

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

STUDY ON SINGLE RIGID PILE GROUND IMPROVEMENT MODEL UNDER EMBANKMENT

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model Test Study of Bearing Behavior of Small Prefabricated Piles in Soft Soil Area

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Investigation on Uplift Behavior of Rock-Socketed Belled Piles in Horizontal and Inclined Ground Using 1-g Model Test and 3D Numerical Method

Nonlinear analysis of ultimate bearing capacity of rock socketed pile

Numerical Analysis of Dynamic Response of Large-Diameter Rock-Socketed Monopiles under Seismic Loads

Calculation Method of Uplift Capacity of Pile-Anchor Composite Foundation and Influence of Parameters

Vertical bearing capacity of rock-socketed pile with enlargement at pile end

Calculate and Analysis for Influence of the Ratio of Height to Diameter on Rock-socketed Piles

An enhanced micromechanical rock–pile interface model with application to rock‐socketed pile modeling

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Bearing Behaviors of Rock-Socketed Piles in Layered Dynamically Compacted Soil-Rock Mixtures: A Case Study

Field Experimental Study on Cyclic Uplift Behavior of Anchored Pier Foundations

STUDY ON THE BEHAVIOR OF CANTILEVER DOUBLE-ROW PILES SUPPORTING DEEP EXCAVATION

Solution of the Ultimate Bearing Capacity at the Tip of a Pile in Inclined Rocks Based on the Hoek-Brown Criterion

Behavior of Large-Diameter Rock-Socketed Piles under Lateral Loads

Load-Bearing Characteristics of Large-Diameter Rock-Socketed Piles Based on Ultimate Load Tests

Study on Behavior and Bearing Capacity Computation Method of Shallow Rock-Socketed Short Piles Based on the Self-Balanced Loading Test