Abstract:The increasingly urgent issue of climate change is driving the development of carbon dioxide (CO2) capture and separation technologies in flue gas after combustion. The monolithic adsorbent stands out in practical adsorption applications for its simplified powder compaction process while maintaining the inherent balance between energy consumption for regeneration and selectivity for adsorption. However, optimizing the adsorption capacity and selectivity of CO2 separation materials remains a significant challenge. Herein, we synthesized monolithic polymer networks (N-CMPs) with triphenylamine adsorption sites, acid-base environment tolerance, and precise narrow microchannel pore systems for the selective sieving of CO2 and particulate matter (PM) in flue gas. The inherent continuous covalent bonding of N-CMPs, along with their highly delocalized π-π conjugated porous framework, ensures the stability of the monolithic polymer network's adsorption and separation capabilities under wet and acid-base conditions. Specifically, under the conditions of 1 bar at 273 K, the CO2 adsorption capacity of N-CMP-1 is 3.35 mmol/g. Attributed to the highly polar environment generated by triphenylamine and the inherent high micropore/mesopore ratio, N-CMPs exhibit an excellent ideal adsorbed solution theory (IAST) selectivity for CO2/N2 under simulated flue gas conditions (CO2/N2 = 15:85). Dynamic breakthrough experiments further visualize the high separation efficiency of N-CMPs in practical adsorption applications. Moreover, under acid-base conditions, N-CMPs achieve a capture efficiency exceeding 99.76 % for PM0.3, enabling the selective separation of CO2 and PM in flue gas. In fact, the combined capture of hazardous PM and CO2 from the exhaust gases produced by the combustion of fossil fuels will play a pivotal role in mitigating climate change and environmental issues until low-carbon and alternative energy technologies are widely adopted.

A molecular level-based parametric study on the capture of hydrogen sulfide and carbon oxides from flue gas mixtures using Au nanopores

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Integrated Dynamic and Steady State Method and Its Application on the Screening of MoS2 Nanosheet-Containing Adsorbents for Hg-0 Capture

Trace Flue Gas Contaminants Poison Coordinatively Unsaturated Metal–Organic Frameworks: Implications for CO2Adsorption and Separation

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas

Enhanced Tolerance to Flue Gas Contaminants on Carbon Dioxide Capture Using Amine-Functionalized Multiwalled Carbon Nanotubes

An Experimental Study on Coal-Char Sorbents for Gas-Phase Mercury Removal from Flue Gas

Fixed-bed Experimental Evaluation of Carbon Performance on Elemental Mercury Adsorption

Adsorption and purification of biogas inside graphitic nanopores: molecular dynamics simulation approach

Fabrication of Novel Nanosulfur-Modified Activated Carbon Adsorbent for Elemental Mercury Removal from Flue Gas

Experimental and theoretical study on recovered nano amorphous selenium as efficient adsorbents for mercury capture from flue gas

A robust triphenylamine-based monolithic polymer network for selective sieving of CO2 and PM from flue gas

Dynamic Desulfurization Process over Porous Zn–Cu-Based Materials in a Packed Column: Adsorption Kinetics and Breakthrough Modeling

Optimization of CO2 Capture Efficiency in a Flue Gas Treatment System: Assessing the Impact of Flow Rates, Absorbent Concentrations, Nanoparticles, and Temperature

Optimizing Sieving Effect for CO2 Capture from Humid Air Using an Adaptive Ultramicroporous Framework (Small 44/2023)

Ultrafine Au nanoparticles confined in three-dimensional mesopores of MCM-48 for efficient and regenerable Hg0 removal sorbent in H2S and H2O containing natural gas

Engineering Nanoporous Polyaminal Networks for Superior SO2 Capture and Selectivity

Preparation of halloysite nanotubes-encapsulated magnetic microspheres for elemental mercury removal from coal-fired flue gas

Gaseous Arsenic Capture in Flue Gas by CuCl 2 -Modified Halloysite Nanotube Composites with High-Temperature NO x and SO x Resistance

Decoupling the influence of NOx in flue gas on the application of nano-amorphous selenium for mercury removal

Unraveling the capture mechanism of gaseous As2O3 over H-ZSM-5 zeolite from coal-fired flue gas: Experimental and theoretical insights