Abstract:With the rapid development of Hg0 treatment methods in flue gas, the key challenge at the current stage is the trade-off between adsorbent performance, treatment cost and environmental friendliness. A series of dual 2-dimensional CuSe/g-C3N4 nano-heterostructures (CSCN) were successfully synthesized through an incipient wetness impregnation method followed by in-situ selenization, and further used for gaseous elemental mercury immobilization. The results had shown that the as-synthesized CSCN with CuSe loading ratio of 20% (20CSCN) achieved the maximum mercury removal performance. Up to 95.09% of Hg0 removal efficiency was achieved by 20CSCN under rigorous experimental conditions with the gas hourly space velocity and initial Hg0 concentration of 240000 h−1 and 180 ug/m3, respectively. After a 10 h adsorption test, the equilibrium adsorption capacity of 20CSCN reached 9.113 mg/g. Owing to the generation of dual 2-dimensional heterojunctions, the mercury removal performance of 20CSCN was superior to the contrast 20CSCN(mix) prepared by simply mechanically mixing. Besides, the acidic gases (NO and SO2) in the flue gas will adversely affect the Hg0 capture performance of CSCN, while O2 and CO2 exhibited a neutral effect on the Hg0 capture. Based on the analysis of XPS and TPD results, the chemical reaction rate was the main rate-controlling step and the chemisorption dominated the conversion of Hg0 on heterojunctions, which was in accordance with the Mars-Maessen mechanism. The active Se ligands on the surface of the heterojunction, as the main activity center of chemical reaction, could rapidly capture Hg0 in the flue gas to form stable HgSe. This can effectively avoid the secondary pollution caused by the re-release of Hg0 from Hg-containing waste exposed to the environment, because of its low Hg-leaching characteristic.

Decoupling the influence of NOx in flue gas on the application of nano-amorphous selenium for mercury removal

Review of Elemental Mercury (hg0) Removal by CuO-based Materials

Mechanistic Investigation on the Hg0 Elimination Ability of MnOx–CeOx Nanorod Adsorbents: Effects of Mn/Ce Molar Ratio

Mechanistic investigation on the Hg 0 elimination ability of MnO x –CeO x nanorod adsorbents: effects of Mn/Ce molar ratio

Recent advances in MnO<sub>2</sub>-based adsorbents for mercury removal from coal-fired flue gas

Experimental and theoretical study on recovered nano amorphous selenium as efficient adsorbents for mercury capture from flue gas

Influence of Flue Gas Components on the Mercury Adsorption/oxidation by Mechanochemical S2Cl2-modified Sawdust Coke

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Mercury Removal from Coal Combustion Flue Gas by Mechanochemically Sulfur Modified Straw Coke and Its Mercury Stability

Insights into the enhanced mechanism of selenium-doped iron nitride carbon catalysts for elemental mercury removal in flue gas

Adsorption removal of mercury from flue gas by metal selenide: A review

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas

Dual 2-dimensional CuSe/g-C3N4 nano-heterostructure for boosting immobilization of elemental mercury in flue gas

Fabrication of Novel Nanosulfur-Modified Activated Carbon Adsorbent for Elemental Mercury Removal from Flue Gas

Elemental Mercury Removal from Syngas by Nano-Zno Sorbent

Novel magnetic renewable Ni0.85Se/g-C3N4 material for highly efficient removal of elemental mercury from coal-fired flue gas

Selenium-modified activated coke: a high-capacity and facile designed Hg0 adsorbent for coal-fired flue gas

Efficient immobilization and detoxification of gaseous elemental mercury by nanoflower/rod WSe 2 /halloysite composite: Performance and mechanisms

Core-shell nanostructure α-Fe2O3/SnO2 binary oxides for the catalytic oxidation and adsorption of elemental mercury from flue gas

Effective Capture and Immobilization of Hg 0 from Flue Gas Using a Novel Selenium-Functionalized SrFeO 3-δ /HNTs Half-Metal Composite: Adsorption, Photocatalytic Oxidation, and Mechanism

Influence of the SCR (Selective Catalytic Reduction)-based Nox Removal System on Mercury Morphology in Coal-fired Flue Gas