Abstract:A compact laser probe of the fiber-optic laser-induced breakdown spectroscopy (FO-LIBS) system, based on a single-lens for energy focus and radiation collection, was developed in this paper. Elemental analysis of the Z3CN20-09 M steel sample, which is usually used as the structural material for main pipelines in nuclear power plants, was carried out using this laser probe. Most elements (e.g. Fe, Cr, Ni, Mn, Mo, Co, Cu, Nb, and Si) were successfully detected. The distance between the fiber output end face and the lens, which was one of the most important factors affecting the focused laser spot size and further inducing different degrees of self-absorption, was optimized. It was clear that the spectral intensities increased with the distance before decreasing. The optimal range of the distance was obtained by finding out the maximum spectral intensities and minimum spectral fluctuations. The effects of distances, which can be understood as the effects of spot sizes, were studied using plasma diagnostic methods. When the distance was shorter than the optimal range, the distinct self-absorption was observed, which was analyzed by the fast photography. Calculated changing trend of self-absorption effects was consistent with the observed spectral profiles. When the distance was longer than the optimal range, the plasma temperature and density became lower after similar to 1 mu s. This demonstrates that it is possible for the single-lens laser probe to realize the accurate calibration and control of the focused spot size to achieve the best working conditions for a FO-LIBS system.

Femtogram heavy metal element detection by simultaneous spatial and temporal focusing laser induced breakdown spectroscopy

Research progress on the application of laser-induced breakdown spectroscopy in metal element detection

Femtosecond laser-induced surface nanostructures for enhanced trace metal element detection in water

Heavy metal detection in soil using a mobile laser induced breakdown spectroscopy system

Discrimination of Microbiological Samples Using Femtosecond Laser-Induced Breakdown Spectroscopy

Double-pulse neodymium YAG/Carbon dioxide laser-induced breakdown spectroscopy for excitation of bulk and trace analytes

Element recognition of laser-induced breakdown spectroscopy by comparing vectors of peak quantities

Sensitivity, precision, and accuracy of fs-LIBS for heavy metal detection in flowing aqueous solutions

Multi-Element Detection in Molten Steel with Laser-Induced Breakdown Spectroscopy

Heavy Metal Detection in Soils by Laser Induced Breakdown Spectroscopy Using Hemispherical Spatial Confinement

Indirect Laser-Induced Breakdown of Transparent Thin Gel Layer for Sensitive Trace Element Detection

An Echellograms-Based Quantitative Analysis Method of Laser-Induced Breakdown Spectroscopy

Time- and Space-Resolved Emission Spectroscopy of Laser-Induced Plasma and Its Applications for Trace Element Detection

Femtogram Detection and Quantitation of Residues Using Laser Ionization Orthogonal Time-Of-Flight Mass Spectrometry

Laser induced breakdown spectroscopy for multielement analysis of powder materials utilized in additive technologies

Quantitative aluminum alloys analysis using laser-induced breakdown spectroscopy

Detection of heavy metals in water sample by laser-induced breakdown spectroscopy combined with annular groove graphite flake

Heavy metals in the atmosphere determination by double-pulse laser induced breakdown spectroscopy

Three-dimensional Elemental Imaging of Material Surface Using Image-Assisted Laser-Induced Breakdown Spectroscopy

Laser-induced Breakdown Spectroscopy Detection of Heavy Metal in Water Based on Graphite Conch Method

Parametric Study of Fiber-Optic Laser-Induced Breakdown Spectroscopy for Elemental Analysis of Z3CN20-09M Steel from Nuclear Power Plants