Abstract:Laser-induced breakdown spectroscopy (LIBS) has provided an optional access method to analyze multiple components of geomaterials with the advantages of rapid detection and minimal damage and preprocessing of samples compared with other conventional analytical methods. A fiber-optic LIBS (FO-LIBS) system with a compact laser probe was established to analyze ten different sediment samples, with Al, Fe, Ca, Mg, Ti, Mn, V, and Cr successfully detected. The spectra from the different samples are quite different due to matrix effects, and the spot size has a great influence on both plasma evolution and emission spectra for the same sample. The laser irradiance decreased from 1.382 to 0.855 GW/cm(2) with increasing the spot diameter from 480 to 610 mu m as the spectral fluctuation was gradually aggravated. Internal standardization (IS) was utilized to decline the spectral fluctuations caused by the spot size and matrix effects for the quantification of multiple elements. By adopting the most suitable combinations of emission lines, the fluctuation of emission lines caused by the spot size was also limited with a relative standard deviation lower than 30%. The R-2 of all the calibration curves was higher than 0.9 with the major element Si out of the detection range and spectra mixed at different spot sizes, which outperformed normalization by the whole spectrum. Two multi-variate chemometric methods, including partial least squares regression and support vector regression, were also applied to establish quantitative models for the sediments. It was found that three methods provided similar prediction results, while IS could establish a more robust calibration model that was less sensitive to spot size. This study also demonstrated that FO-LIBS has the potential to quantitatively analyze the chemical compositions of geomaterials combined with IS and machine learning.

Element recognition of laser-induced breakdown spectroscopy by comparing vectors of peak quantities

Elemental recognition method based on laser induced breakdown spectroscopy

Research progress on the application of laser-induced breakdown spectroscopy in metal element detection

Laser-Induced Breakdown Spectroscopy (LIBS) for Trace Element Detection: A Review

Elemental Analysis Technique Based on Laser Induced Breakdown Spectroscopy

On the Spectral Identification and Wavelength Dependence of Rare-Earth Ore Emission by Laser-Induced Breakdown Spectroscopy

Multielement simultaneous quantitative analysis of trace elements in stainless steel via full spectrum laser-induced breakdown spectroscopy

An Echellograms-Based Quantitative Analysis Method of Laser-Induced Breakdown Spectroscopy

Improving signal stability and analysis accuracy in laser-induced breakdown spectroscopy by multi-directional collection

Application of deep learning in laser-induced breakdown spectroscopy: a review

Laser-induced breakdown spectroscopy for real time and online elemental analysis

Methods of Data Processing for Trace Elements Analysis Using Laser Induced Breakdown Spectroscopy

Application of Molecular Emissions in Laser-Induced Breakdown Spectroscopy: A Review

Study on the Automatic Recognition Method of Elemental Spectra in Laser Induced Breakdown Spetroscopy

Study on the Automatic Extraction Method of Spectral Data Features in Laser Induced Breakdown Spectroscopy

Machine learning in laser-induced breakdown spectroscopy: A review

Multi-Element Detection in Molten Steel with Laser-Induced Breakdown Spectroscopy

[Influence of laser power and incident angle as well as testing distance on laser inducted breakdown spectroscopy (LIBS) technology for spectroscopy diagnosis and multi-element analysis]

Rapid and high-resolution visualization elements analysis of material surface based on laser-induced breakdown spectroscopy and hyperspectral imaging

Parametric Study of Spot Size and Multi-Elemental Quantification of Geomaterials under Complex Matrix Conditions Using Fiber-Optic Laser-Induced Breakdown Spectroscopy

Spectral enhancement and quantitative accuracy improvement of trace metal elements in aqueous solutions using electrostatic-assisted laser-induced breakdown spectroscopy