Abstract:With the aim of improving the arsine (AsH3) removal efficiency, 5A molecular sieves were modified by the transition metal oxides and used as catalysts. MnOx catalysts supported on 5A molecular sieves (Mn-5A) were prepared by an impregnation method and subsequently tested toward the catalytic oxidation of AsH3, under micro-oxygen conditions at 150 degrees C. The effects of the metal oxide types that supported, the impregnate concentration of manganese nitrate, the calcination temperature, the oxygen content, and the fixed bed reaction temperature on the AsH3 removal efficiency were studied. The optimum catalyst was prepared by a solution impregnation method with a 0.5 mol.L-1 Mn2+ aqueous solution and subsequently calcined at 500 degrees C. This catalyst showed the highest activity toward the oxidation of AsH3 among the samples prepared herein (100% conversion) over a good low-temperature operation window (120-160 degrees C) and under low oxygen concentration (0-2.0%) conditions. The majority presence of Mn4+ active species is believed to be one predominant factor accounting for the excellent AsH3 removal efficiency of this catalyst. The dominant active Mn4+ species of Mn-5A is found to be a mixture of MnO2, Mn3O4, and Mn2O3. BET area analysis coupled with EDS measurement show that after oxidizing AsH3 with 02, the resulting As2O5 seems to block the surface of Mn-5A leading to a decrease of the activity. XPS data indicates that the oxidation state of MnOx species on Mn-5A was not affected after reaction. So the main deterioration mechanism of Mn-5A on AsH3 removal under our reaction condition is mainly due to physical blocking effect. According to the characterizations results, the Mn-5A catalyst possessed a higher number of active sites than the rest of samples and formed active intermediates during reaction, both factors leading the highly efficient removal of AsH3 under low-temperature micro-oxygen conditions.

Defect confinement in CuO/HZSM-5-T catalysts: A novel approach for enhancing stability in AsH 3 catalytic oxidation

Spatially Asymmetrical Copper Dimer in Ceria As an Efficiently Synergistic Oxidation Catalyst

Catalytic oxidation mechanism of AsH 3 over CuO@SiO 2 core-shell catalysts via experimental and theoretical studies

Defect-Confinement Strategy for Constructing CuO Clusters on Carbon Nanotubes for Catalytic Oxidation of AsH 3 at Room Temperature

Optimization of CuO@SiO2 core-shell catalysts for catalytic AsH3 oxidation

Stable Cu Catalysts Supported by Two-dimensional SiO<sub>2</sub> with Strong Metal-Support Interaction

Crystal Facet Induced Single-Atom Pd/CoxOyon a Tunable Metal-Support Interface for Low Temperature Catalytic Oxidation

Improved Arsine Removal Efficiency over MnOx Supported Molecular Sieves Catalysts Via Micro-Oxygen Oxidation

Thermally stable high-loading single Cu sites on ZSM-5 for selective catalytic oxidation of NH3

Enhanced hydrothermal stability of Cu-SSZ-13 by compositing with Cu-SAPO-34 in selective catalytic reduction of nitrogen oxides with ammonia

A controllable zeolite framework stability of Cu/SAPO-34 via adjusting the copper coordination environment for NH 3 -SCR under hydrothermal condition

Preparation of CuZnAl hydrotalcite-like catalysts for AsH3 abatement at low temperatures

Synergistic Effects Between Copper and Tungsten on the Structural and Acidic Properties of CuOx/WOx–ZrO2 Catalyst

Sintering- and oxidation-resistant ultrasmall Cu(I)/(II) oxides supported on defect-rich mesoporous alumina microspheres boosting catalytic ozonation

Facile Synthesis of Au Embedded CuOx-CeO2 Core/shell Nanospheres As Highly Reactive and Sinter-Resistant Catalysts for Catalytic Hydrogenation of P-Nitrophenol

Enhancing the activity and sulfur resistance of CuFeAlO x catalyst via the structure effect for the simultaneous removal of Hg 0 and NO at wide temperature

Shaping hollow spherical assemblies for enhanced Cu0/Cu+ interface to boost C2+ selectivity in CO2 electroreduction

Highly Enhanced Catalytic Stability of Copper by the Synergistic Effect of Porous Hierarchy and Alloying for Selective Hydrogenation Reaction

Coupling Catalytic Hydrolysis and Oxidation of HCN over HZSM-5 Modified by Metal (fe,cu) Oxides

Enhancing AsH 3 Detoxification via Electron-Deficient [Ni III -OH (μ-O)] in a Nickel-Modified NaY Zeolite: A Pathway toward As 0 Products

Improvement of Low-Temperature Hydrothermal Stability of Cu/Sapo-34 Catalysts by Cu2+ Species