Abstract:With the aim of improving the arsine (AsH3) removal efficiency, 5A molecular sieves were modified by the transition metal oxides and used as catalysts. MnOx catalysts supported on 5A molecular sieves (Mn-5A) were prepared by an impregnation method and subsequently tested toward the catalytic oxidation of AsH3, under micro-oxygen conditions at 150 degrees C. The effects of the metal oxide types that supported, the impregnate concentration of manganese nitrate, the calcination temperature, the oxygen content, and the fixed bed reaction temperature on the AsH3 removal efficiency were studied. The optimum catalyst was prepared by a solution impregnation method with a 0.5 mol.L-1 Mn2+ aqueous solution and subsequently calcined at 500 degrees C. This catalyst showed the highest activity toward the oxidation of AsH3 among the samples prepared herein (100% conversion) over a good low-temperature operation window (120-160 degrees C) and under low oxygen concentration (0-2.0%) conditions. The majority presence of Mn4+ active species is believed to be one predominant factor accounting for the excellent AsH3 removal efficiency of this catalyst. The dominant active Mn4+ species of Mn-5A is found to be a mixture of MnO2, Mn3O4, and Mn2O3. BET area analysis coupled with EDS measurement show that after oxidizing AsH3 with 02, the resulting As2O5 seems to block the surface of Mn-5A leading to a decrease of the activity. XPS data indicates that the oxidation state of MnOx species on Mn-5A was not affected after reaction. So the main deterioration mechanism of Mn-5A on AsH3 removal under our reaction condition is mainly due to physical blocking effect. According to the characterizations results, the Mn-5A catalyst possessed a higher number of active sites than the rest of samples and formed active intermediates during reaction, both factors leading the highly efficient removal of AsH3 under low-temperature micro-oxygen conditions.

Improved Arsine Removal Efficiency over MnOx Supported Molecular Sieves Catalysts Via Micro-Oxygen Oxidation

In Situ Fabrication of Highly Active Γ-Mno2/smmno3 Catalyst for Deep Catalytic Oxidation of Gaseous Benzene, Ethylbenzene, Toluene, and O-Xylene.

Optimization of CuO@SiO2 core-shell catalysts for catalytic AsH3 oxidation

Unravelling the nature of the active species as well as the Mn doping effect over gamma-Al2O3 catalyst for eliminating AsH3 and PH3

Catalytic oxidation mechanism of AsH 3 over CuO@SiO 2 core-shell catalysts via experimental and theoretical studies

Defect confinement in CuO/HZSM-5-T catalysts: A novel approach for enhancing stability in AsH 3 catalytic oxidation

Photoinduced Oxygen Activation of Fe2O3/TiO2 Heterostructures for Efficient Removal of AsH3

Sepiolite-Supported Manganese Oxide as an Efficient Catalyst for Formaldehyde Oxidation: Performance and Mechanism

Heterogeneous Catalysis of Ozone Using Iron–Manganese Silicate for Degradation of Acrylic Acid

Promoting Effect of Polyoxometallic Acid Modification on the NH3-SCR Performance of Mn-Based Catalysts

The enhanced removal of arsenite from water by double-shell CuOx@MnOy hollow spheres (DCMHS): behavior and mechanisms

Three-Dimensional Ordered Mesoporous Mno2-Supported Ag Nanoparticles for Catalytic Removal of Formaldehyde

Dual-functional effect encompassing adsorption and catalysis by Mn-modified iron-based sorbents for arsenic removal: Experimental and DFT study

Ascorbic acid enhanced MnFe 2 O 4 /peroxymonosulfate oxidation of organic pollutant: Key role of singlet oxygen generation and Fe/Mn cycling

Enhanced removal of As(iii) by manganese-doped defective UiO-66 coupled peroxymonosulfate: multiple reactive oxygen species and system stability

Enhancing water resistance of α-MnO 2 catalyst for efficient airborne benzene oxidation at mild temperatures via facile Ag incorporation

Ag-modified SmMn2O5 Catalysts for CO and C3H8 Oxidation

Promoting effect of polyoxometallic acid modification on the NH 3 -SCR performance of Mn-based catalysts

Enhanced oxidative ability, recyclability, water tolerance and aromatic resistance of α-MnO2 catalyst for room-temperature formaldehyde oxidation via simple oxalic acid treatment

Promoting Effect of Mn on In Situ Synthesized Cu-SSZ-13 for NH3-SCR

Preparation of CuZnAl hydrotalcite-like catalysts for AsH3 abatement at low temperatures