Abstract:6111Al-Ce alloy morphology and tensile properties are significantly influenced by Ce content.Al11Ce3 precipitates size and morphology are quantitatively characterized.The strengthening and fracture mechanism are systematically discussed here.In this work, the effects of Ce addition (0, 0.1 wt%, 0.3 wt%, 0.5 wt% and 0.7 wt%) on the evolution of microstructure and mechanical properties of 6111Al alloy and strengthening mechanism of 6111Al-Ce alloy were systematically investigated by polarizing microscope, scanning electronic microscopy, energy dispersive spectroscopy and high-resolution transmission electron microscope. The results indicate that with 0.3 wt% Ce addition, the α-Al grains show the equiaxed crystal morphology with the average size decreasing from 137 to 57 μm and numerous small AlCeSi phases with lump-like or plate-like morphology distribute closely along the grain boundary. The peak yield strength, ultimate tensile strength and elongation of 6111Al-Ce alloy reach to 279 MPa, 316 MPa and 12.1%, respectively, which is attributed to the grain refinement strengthening and the formation of nanosized Al11Ce3 precipitates. Eventually, this investigation gives us instructive suggestion to prepare the new kind of aluminum alloy with high strength and high ductility.TEM image of secondary Al11Ce3 particle and the mechanical properties of Al-Ce alloy at room temperature.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1002072120304440-fx1_lrg.jpg">Download : Download high-res image (377KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1002072120304440-fx1.jpg">Download : Download full-size image</a></li></ol>

Nucleation and growth behavior of primary Al 11 Ce 3 intermetallic compounds during solidification in a hypereutectic Al-Ce alloy

In Situ SEM, TEM, EBSD Characterization of Nucleation and Early Growth of Pure Fe/Pure Al Intermetallic Compounds

On the Al-Al11Ce3 Eutectic Transformation in Aluminum-Cerium Binary Alloys

Refining Mechanism and Elevated-Temperature Mechanical Properties of Al-Ce Alloys Solidified under Super Gravity Field

Microstructure diversity dominated by the interplay between primary intermetallics and eutectics for Al-Ce heat-resistant alloys

Stabilization of the Ternary Eutectic Growth in Additively Manufactured AlNiCe Alloys

Characteristics on microstructure and mechanical performances of 6111Al influenced by Ce-containing precipitates

Effect of the addition of cerium on the microstructure evolution and thermal expansion properties of cast Al-Cu-Fe alloy

Achieving Enhanced Strength Retention at Elevated Temperatures in Ultrafine-Fibrous Interconnected Al-Ce-Ni Eutectic Alloy Solidified under Super-Gravity Field

Orderly Nucleation and Competitive Growth Behaviors of Ti-Al Intermetallic Compounds in Ti/TiAl3 Diffusion Couple under High Temperature

Composition templating for heterogeneous nucleation of intermetallic compounds

Intermetallic Growth and Interfacial Properties of the Grain Refiners in Al Alloys

Investigation of Al/CeO2 interfacial relationships for epitaxial growth of Al on CeO2 substrates: first-principles calculation

Elevated temperature microstructural stability in Al-7Cu-0.5Mn-0.2Zr alloys through Ce addition: Enhanced coherent interfacial stability of cu-rich θ'/α-Al interface

The Growth Behavior for Intermetallic Compounds at the Interface of Aluminum-Steel Weld Joint

Utilizing integrated neutron diffraction and elastoplastic self-consistent crystal plasticity model to quantitatively assess the strengthening mechanism in Al-12.5Ce and Al-12.5Ce-0.4Mg alloys

Investigation of Microstructure Evolution and Phase Selection of Peritectic Cuce Alloy During High-Temperature Gradient Directional Solidification

Research on homogeneous nucleation and microstructure evolution of aluminium alloy melt

Enhanced load transfer and ductility in Al–9Ce alloy through heterogeneous lamellar microstructure design by cold rolling and annealing

Orientation relationships and interface structure between Al11Ce3 and Al in Al–Ce eutectic

Influence of At%Ce on the electronic structure and mechanical properties of Al-Ce compounds from first-principles calculations