Abstract:Coherent cuboidal precipitation of γ′ (Ni3Al) phases can significantly improve the high temperature properties of Cu–Ni–Al alloys, in which, substantial γ′ phases and a suitable lattice misfit degree between γ (Cu matrix) and γ′ phase (δγ-γ′) is necessary. However, the re-dissolution and grain boundary discontinuous precipitation would induce the degradation of heating resistance in the alloys with higher Cu content. Herein introducing Si with strong elemental interaction to resolve this issue. In this research, series of Cu85.71Ni10.72-x Al3.57Six (x = 0, 0.45, 0.89, 1.34 and 1.79) alloys are designed and prepared, and the effect of Si addition on microstructure, properties at room or high temperature are investigated. The results demonstrate that Si with completely solution state has an effect on the promoting of γ′ precipitation and suppression of the discontinuous precipitation. Meanwhile, Si addition regulates the δγ-γ′, transforming the shape of γ′ phases from spherical to cuboidal and delaying the re-dissolution of γ′ phase and improving the stability of matrix. First-principles calculations and work function results indicate that Gibbs free energy ΔG of γ′ phase decreases as well as exhibiting a more negative cohesive energy Eb for a suitable Si addition, which enables the alloys to be more stable and homogeneous. Si exhibits a good optimization effect for Cu–Ni–Al–Si alloy, which leads to excellent high temperature properties that can be extended to alloys with higher Cu content by Si addition. Therefore, multi-componentization is an efficient way to improve the properties of Cu–Ni–Al alloys, and an appropriate match in elemental interaction is crucial. The research provides theoretical and experimental basis for the development of heat-resistant Cu alloy with good comprehensive properties.

Composition templating for heterogeneous nucleation of intermetallic compounds

Research on homogeneous nucleation and microstructure evolution of aluminium alloy melt

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

Intermetallic Growth and Interfacial Properties of the Grain Refiners in Al Alloys

A new insight into heterogeneous nucleation mechanism of Al by non-stoichiometric TiCx

Heterogeneous nucleation of T1 precipitates in solid solution of Al-Cu-Li alloys from Ag-rich structures: An ab initio study

Exploring crystal structures, stability and mechanical properties of Fe, Mn-containing intermetallics in Al-Si Alloy by experiments and first-principles calculations

First principles study on heterogeneous interfaces of TiCu alloys through aluminum addition

Synthesis and Characterization of In Situ Dendritic/Particulate α-Al(Fe,TM)Si Phase Reinforced Al Matrix Composites

Solidification microstructure manipulation mechanism of hypoeutectic and hypereutectic Al-Si alloys controlled by trace in-situ nano-Fe 2 B and nano-Fe 3 Si

Probing the formation mechanism of hierarchical microstructures in experimental Ni-based superalloys

Theoretical design and distribution control of precipitates and solute elements in Al−Zn−Mg−Cu alloys with heterostructure

Revealing the nucleation and growth mechanisms of Fe-rich phases in Al–Cu–Fe(-Si) alloys under the influence of Al–Ti–B

Orderly Nucleation and Competitive Growth Behaviors of Ti-Al Intermetallic Compounds in Ti/TiAl3 Diffusion Couple under High Temperature

In-situ atomic tracking of intermetallic compound formation during thermal annealing

Metastable alloys synthesised by ion mixing and thermodynamic and kinetic modelling

The Growth Behavior for Intermetallic Compounds at the Interface of Aluminum-Steel Weld Joint

Strong elemental interaction enhances the thermal stability of coherent precipitation strengthened Cu–Ni–Al alloys

In Situ SEM, TEM, EBSD Characterization of Nucleation and Early Growth of Pure Fe/Pure Al Intermetallic Compounds

Atomic Characteristics of Heterogeneous Nucleation During Solidification of Aluminum Alloys: A Critical Review

Nucleation and growth behavior of primary Al 11 Ce 3 intermetallic compounds during solidification in a hypereutectic Al-Ce alloy