Abstract:Magnetostrictive Fe-Ga alloys, featuring with good machinability, high Curie temperature, and high permeability, have received increasing attention in fields such as actuators, implants, and energy harvesting. Unfortunately, bulk polycrystalline Fe-Ga alloys usually suffer poor magnetostrictive strains compromised by the randomness of grain structure and the intricate phase constitution. The current study was centered on the fabrication of bulk polycrystalline Fe81Ga19 alloys with tailored grain morphology and phase arrangement utilizing laser-beam powder bed fusion (LPBF) technology. Particular emphasis was laid on investigating the repercussions of LPBF process parameters on the microstructure and magnetostrictive performance. The findings illustrated a non-linear interplay between laser power and the relative density of laser powder bed fusion-fabricated (LPBFed) Fe81Ga19 alloys, marked by an initial augmentation followed by a subsequent decrement. Similarly, a consistent trend was observed for the LPBFed alloys at varying scan speeds. In particular, the LPBFed Fe81Ga19 alloys exhibited a highest density at optimized process parameters (laser power set at 120 W paired with a scan speed of 100 mm/s) due to suitable laser energy input during LPBF process. It was experimentally shown that elongated columnar grains and disorder A2 phase structures were obtained within the alloys attibutes to the high temperature gradient and rapid cooling kinetics intrinsic to LPBF, contributing to a desirable magnetostrictive strain of ~87 ppm for bulk polycrystalline Fe81Ga19 alloys. Moreover, a good dynamic magnetostrictive response of the LPBFed alloys was confirmed by the near-synchronous variations between magnetostrictive behavior and alternating magnetic fields. It can be derived from these findings that LPBF process may be a promising method to prepare bulk magnetostrictive Fe-Ga alloys for versatile applications.

Flexible Pr‐Doped Fe–Ga Composite Materials: Preparation, Microstructure, and Magnetostrictive Properties

Magnetostriction and electrical resistivity of Sm0.88Nd0.12Fe1.93 bonded composites

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Design and Large Magnetostriction of Tb0.34Dy0.56Pr0.1Fe1.9/epoxy Composite Containing Near-Spherical Single-Crystal Particles

The origin of large magnetostrictive properties of rare earth doped Fe-Ga as-cast alloys

Structure and magnetic properties of mechanically alloyed Tb0.7Pr0.3(Fe0.9B0.1)1.93 and the magnetostriction of its epoxy composites

Ferromagnetic Composite with Stress-Insensitive Magnetic Permeability: Compensation of Stress-Induced Anisotropies

Structure, Thermal Stability and Magnetostrictive Properties of PrFex (1.5 ≤ X ≤ 3.0) Alloys.

Solid-state Synthesis and High Magnetostriction Performances of Heavy Rare Earth–Free Sm0.88Nd0.12Fex Particulate Composites

Synthesis and Magnetostrictive Properties of High-Pr Content ${\rm Sm}_{1-x}{\rm Pr}_{x}{\rm Fe}_{1.9}$ Cubic Laves Alloys

Laser-beam powder bed fusion of magnetostrictive Fe 81 Ga 19 alloys: parameter optimization, microstructural evolution and magnetostrictive properties

Effect of Dy Doping on Magnetostrictive and Mechanical Properties of Fe 83 Ga 17 Alloy

Influence of Microstructural Features on the Effective Magnetostriction of Composite Materials

Synthesis and Magnetostrictive Properties of Pr(Fe1.95b0.05)(1.93) Bulk Nanocrystalline Alloy

Microstructure and Magnetostriction of (dy0.7tb0.3)1−xprxfe1.85 and (dy0.7tb0.3)0.7pr0.3fey Alloys

Giant enhancement of magnetostriction in Pt doped FeGa ribbons

Synthesis and Magnetostriction of Melt-Spun Pr1−xTbx(Fe0.6Co0.4)2 Alloys

Synthesis and Magnetostriction of PrxCe1−xFe1.9(0.5≤x≤1.0) Alloys

Large and sensitive magnetostriction in ferromagnetic composites with nanodispersive precipitates

Magnetic and electromagnetic properties of Pr doped strontium ferrite/polyaniline composite film

Mn Substitution Effect on the Magnetic Properties of Prfe1.9 Alloy