Abstract:Silica fiber optic sensors are resistant to corrosive environments and high temperatures, making them attractive candidates for harsh conditions found in nuclear and aerospace industries. Moreover, fibers can be deployed remotely for continuous measuring of spatially distributed temperatures and strains. This study investigated embedding a Ni/Cu bi-metallic coated fiber in a stainless-steel 316 (SS316) matrix using laser powder bed fusion towards functionalizing metal components for site-specific health monitoring. The embedded fiber was continuously interrogated during controlled heating to 1000°C. The measured fiber strains were similar to the expected differential thermal strains between the fiber and the SS316 matrix, until divergent behavior was observed at temperatures >500°C. No debonding at the matrix–coating–fiber interfaces was observed during microscopy, but significant interactions between the coatings and matrix resulted in diffusion-driven chemistry variations and Kirkendall void formation. Applying the strain-lag theory revealed plastic behavior in the Ni coating at temperatures >500°C, limiting the strain transfer to the fiber at higher temperatures. It was estimated that the elastic modulus in the Ni coating had decreased from ~200 GPa at room temperature to below 40 GPa, starting at 600°C. The low elastic modulus above 600°C is within the margin of what the tangent modulus would be in the case of bilinear isotropic hardening. Regardless of the divergent strain transfer at higher temperatures, the fiber was exposed to the equivalent of 1.9% engineering strain at 1000°C, but measured only a 0.7% engineering strain due to the poor strain transfer. Although compensating for the plastic behavior of Ni proved challenging, the bonding of a brittle silica fiber to a metal matrix surviving to 1000°C invites potential iterations on coating material for future application. For example, the embedded fiber is sufficient for acoustic energy transfer, realizing high temperature distributed acoustic sensing.

Carbon nanofibers/liquid metal composites for high temperature laser ultrasound

Proposed Liquid-Cooled Nanowire Lasers

Carbon Nanotube Composite Optoacoustic Transmitters for Strong and High Frequency Ultrasound Generation

Laser ultrasonic inspection for mechanical properties of materials at high temperature

High temperature nanocomposites with photonic group velocity suppression of thermal emission

Thermal Analysis For Laser Selective Removal Of Metallic Single-Walled Carbon Nanotubes

Carbon Nanotubes/nanofibers for Microwave Amplifiers and Parallel E-Beam Lithography

3D Laser Engineering of Molten Core Optical Fibers: Toward a New Generation of Harsh Environment Sensing Devices

Thermal response during volumetric ablation of carbon fiber composites under a high intensity continuous laser irradiation

Transparent Nanofluids with High Thermal Conductivity for Improved Convective Thermal Management of Optoelectronic Devices

High temperature ultrasonic transducers for imaging and measurements in a liquid Pb/Bi eutectic alloy

High-precision nuclear magnetic resonance probe suitable for in situ studies of high-temperature metallic melts

Microstructure, Thermophysical Property and Ablation Behavior of High Thermal Conductivity Carbon/carbon Composites after Heat-Treatment

Surface characterization of fiber laser texturing on Hastelloy C-276 at different temperatures

Distributed Strain Sensing Using Bi-Metallic Coated Fiber Optic Sensors Embedded in Stainless Steel

Heat Conduction Enhancement of a Thermal Interface Material for Heat Sink Applications Using Carbon Nanomaterials

A Fiber Optic Ultrasonic Sensing System for High Temperature Monitoring Using Optically Generated Ultrasonic Waves

Formation of Highly Conductive Composite Coatings and Their Applications to Broadband Antennas and Mechanical Transducers

Study of Nanosecond Laser Ablation on Aluminum and Stainless Steel Targets

Enhancement of Metal Boiling Heat Transfer Performance on Micro-Nano Structure Surface Prepared by Femtosecond Laser

Ultrathin materials for wide bandwidth laser ultrasound generation: titanium dioxide nanoparticle films with adsorbed dye