Abstract:The Vernier effect created using an incorporated Lyot-Sagnac loop is used to create an ultra-high sensitivity temperature sensor based on a ring laser cavity. Unlike standard double Sagnac loop systems, the proposed sensor is fused into a single Sagnac loop by adjusting the welding angle between two polarization-maintaining fibers (PMFs) to achieve effective temperature sensitivity amplification. The PMFs are separated into two arms of 0.8 m and 1 m in length, with a 45° angle difference between the fast axes. The sensor's performance is examined both theoretically and experimentally. The experimental results reveal that the Vernier amplification effect can be achieved via PMF rotating shaft welding. The temperature sensitivity in the laser cavity can reach 2.391 nm/°C, which is increased by a factor of more than eight times compared with a single Sagnac loop structure (0.298 nm/°C) with a length of 0.8 m without the Vernier effect at temperatures ranging from 20 °C to 30 °C. Furthermore, unlike traditional optical fiber sensing that uses a broadband light source (BBS) for detection, which causes issues such as low signal-to-noise ratio and broad bandwidth, the Sagnac loop can be employed as a filter by inserting itself into the fiber ring laser (FRL) cavity. When the external parameters change, the laser is offset by the interference general modulation, allowing the external temperature to be monitored. The superior performance of signal-to-noise ratios of up to 50 dB and bandwidths of less than 0.2 nm is achieved. The proposed sensor has a simple structure and high sensitivity and is expected to play a role in biological cell activity monitoring.

Liquid-Core-Microtubule-Enhanced Laser Sensor for High-Resolution Temperature Measurement

High Sensitivity Temperature Sensor Based on Singlemode-No-core-singlemode Fibre Structure and Alcohol

Fiber Ring Laser Temperature Sensor Based on Liquid-Filled Photonic Crystal Fiber

Compact Optical Fiber Temperature Sensor with High Sensitivity Based on Liquid-Filled Silica Capillary Tube

Whispering Gallery Mode Temperature Sensor of Liquid Microresonastor

Whispering Gallery Mode Laser Based on Cholesteric Liquid Crystal Microdroplets As Temperature Sensor

Liquid-Core Fiber for Temperature Sensing

Adaptive Fiber-Ring Lasers Based on Isopropanol Filled Microfiber Coupler for High-Sensitivity Temperature Sensing

Multiwavelength Single-Longitudinal-Mode Brillouin–Erbium Fiber Laser Sensor for Temperature Measurements with Ultrahigh Resolution

High Sensitive Temperature Sensor Using a Liquid-core Optical Fiber with Small Refractive Index Difference Between Core and Cladding Materials.

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Highly Sensitive Optical Fiber Temperature Sensor Based on Resonance in Sidewall of Liquid-Filled Silica Capillary Tube

Ultrasensitive Temperature Sensor Based on Refractive Index Liquid-Sealed Thin-Core Fiber Modal Interferometers

A High-Sensitivity Temperature Sensor Based on a Liquid Cladding Tapered Microfiber

Integrated Fiber Ring Laser Temperature Sensor Based on Vernier Effect with Lyot-Sagnac Interferometer

High-Resolution Temperature Sensor Based on Intracavity Sensing of Fiber Ring Laser

Highly Sensitive Optical Fiber Temperature Sensor Based on the Thermal Shift of the Liquid–air Interface

A Fiber Ring Cavity Laser Temperature Sensor Based on Polymer-Coated No-Core Fiber as Tunable Filter

Ultrasensitive Mach-Zehnder Interferometric Temperature Sensor Based on Liquid-Filled D-Shaped Fiber Cavity

Liquid Level and Temperature Sensing by Using Dual-Wavelength Fiber Laser Based on Multimode Interferometer and FBG in Parallel

A Fiber Ring Cavity Laser Sensor for Refractive Index and Temperature Measurement with Core-Offset Modal Interferometer As Tunable Filter