Influence of citric acid and EFKA as dispersants on the properties of alumina monoliths produced by tert-butyl alcohol-based freeze-casting
Giovana Magalhães dos Santos,Anna Carolina Britto de Faria,Saulo Lucas Pereira da Silva,Camila de Lima Ribeiro,Tomé Seichi da Nóbrega Guenka,Rodrigo Nunes de Souza,João Paulo Santiago de Assis Silva,Carlos Martins Aiube,Daniel Dornellas Athayde,Luiz Fernando de Sousa Lima,Adriano Possebon Rosa,Nelcy Della Santina Mohallem,Alysson Martins Almeida Silva
DOI: https://doi.org/10.1007/s10853-024-09589-2
IF: 4.5
2024-04-18
Journal of Materials Science
Abstract:In this paper, EFKA FA 4663 (EFKA) dispersant was used for the first time in the alumina slurries tert -butyl alcohol-based freeze-casting and compared to the commonly used anionic dispersant citric acid (CA). The comparison of both dispersants was analyzed at the beginning of the process at different ultra-low freezing temperatures (− 170 to − 130 °C). The monoliths obtained with EFKA presented promising properties due to its stabilization of alumina particles by both electrostatic interactions and steric impediment, a considerable improvement when compared to the CA that promotes the stabilization of alumina particles only by electrostatic interaction. The use of different dispersants, as well as the control of freezing temperature, significantly influenced the microstructural properties of the monoliths. The monoliths exhibited prismatic pore geometry with high connectivity, forming a complex pore channel with total porosity up to 64.7%, and open porosity up to 48.5%. Results confirmed that the modification of the type of dispersant led to a difference in the grain size (up to 23.1%) and pore size (up to 30.5%) obtained in the materials. The monoliths produced with EFKA dispersant presented a considerable compressive strength resistance up to 11.7 MPa due to its dispersion mechanism that provided the thickening of the walls, confirming that the type of dispersion has a strong influence on the final properties of the materials. Therefore, the type of dispersant proved to be another parameter that allows the refinement of alumina monoliths properties, highlighting the use of EFKA as a promising alternative in the system studied.
materials science, multidisciplinary