Abstract:In pursuit of advancing the efficiency of cold energy storage, a uniquely designed curved container has been employed, filled with a water-nanoparticle mixtureQ. The container is equipped with fins, strategically leveraging the enhanced conduction facilitated by the presence of nanoparticles. The simulation of the intricate unsteady phenomena in this study has been conducted using the finite element technique, providing a robust analytical framework. The incorporation of an adaptive grid ensures a refined resolution, particularly in the vicinity of the ice front region. The nanoparticle fraction ( φ ) emerges as a pivotal factor directly influencing the rate of solidifying. The dispersion of nano-powders leads to a noteworthy reduction in completion time, demonstrating a substantial 33.21% improvement. The diameter of the nano-powders (dp) introduces diverse effects on the solidification process, primarily due to its significant influence on the conductivity of the nanomaterial. An in-depth exploration of the impact of dp reveals compelling insights. As the dp increases from its smallest size to 40 nm, there is a commendable 15.12% reduction in the required freezing time. However, a subsequent increment in dp beyond this threshold results in a notable 36.56% increase in the freezing time. The findings presented here not only contribute to the fundamental understanding of freezing processes but also hold practical implications for the design and optimization of cold storage systems.

Influence of particle size on ice nucleation and growth during the freeze-casting process

Ice-Templating of Alumina Suspensions: Effect of Supercooling and Crystal Growth During the Initial Freezing Regime

In Situ X-Ray Radiography and Tomography Observations of the Solidification of Alumina Particles Suspensions. Part I: Initial Instants

Homogeneous and Heterogeneous Nucleation of Potash Alum in Drop-Based Microfluidic Device

Dynamics of the freezing front during the solidification of a colloidal alumina aqueous suspension: in situ X-ray radiography, tomography and modeling

Particles redistribution and structural defects development during ice templating

Particle-scale structure in frozen colloidal suspensions from small angle x-ray scattering

Interaction of Small Ceramic Particles with a Dendritic Solidification Front

Microstructure Formation in Freezing Nanosuspension Droplets

Time lapse, three dimensional in situ imaging of ice crystal growth in a colloidal silica suspension

Microstructure Evolution During the Sintering of Freeze-Cast Alumina

Effect of Particle Size on Properties of Alumina-Based Ceramic Cores

Unidirectional freezing of ceramic suspensions: in situ X-ray investigation of the effects of additives

Size Effect on Nucleation Rate for Homogeneous Crystallization of Nanoscale Water Film

Alumina Aerogels with Unidirectional Channels under Different Freezing Temperatures During Freeze Casting—part I: Control and Analysis of Pore Channels

Architectural control of freeze-cast ceramics through additives and templating

Effect of particle size on the lamellar pore microstructure of porous Al2O3 ceramics fabricated by the unidirectional freezing

Evaluation of thermal storage system during freezing and loading nano-powders

The Effect of Particle Size in Freeze Casting of Porous Alumina–zirconia Composite

Interactions Between Nanoparticles and Polymers in the Diffusion Boundary Layer During Freezing Colloidal Suspensions

In-situ X-Ray observations and thermal modeling of unidirectional and bidirectional freeze casting