Abstract:The sol-gel process has attracted extensive attention for the preparation of advanced inorganic materials. Notably, solvent extraction significantly affects the properties of the final products. However, the poor controllability of the extraction process generally limits the use of solvent extraction technology in regulating the morphologies and structures of inorganic materials. In this study, we successfully constructed a two-stage microfluidic chip, which decoupled the sol droplet generation and extraction solidification processes and realized highly controllable extraction. The influence of flow field parameters on the diffusion of the extractant was investigated via in situ observations, particle image velocimetry, and computational fluid dynamics simulations, which could induce changes in the microsphere morphologies by regulating the extraction diffusion rate. Rapid diffusion of the extractant was found to be beneficial for maintaining sphericity, whereas slow diffusion induced directional deformation in the microspheres. In addition, we revealed the transformation process of the internal microstructure. 1-Nonanol was found to be conducive to the formation of gel networks and long fibers, whereas n-butanol was found to be conducive to the directional ordering of fibers under droplet circulation. Polymorphous hundred-micron alumina microspheres (such as spherical, ravine ellipsoid, erythrocyte, and valve types) were successfully prepared using microfluidic-assisted solvent diffusion and extraction processes.

Dispersion of Nano‐Sized Γ‐alumina Powder in Non‐Polar Solvents

Research on dispersion characteristics of micron grade Al_2O_3 particle in water phase

Synthesis of Nano-Alumina Hydroxide Sol Using Sol-gel Method

Dispersion behavior and stabilization mechanism of alumina powders in silica sol

Temperature Induced Gelation of Non–aqueous Alumina Suspension Using Oleic Acid As Dispersant

Synthesis of Gamma-Alumina Nanopowders Using Waste Metal Aluminum and Stability Surfactants

Controllable Preparation of Γ-Alumina Nanoparticles with Bimodal Pore Size Distribution in Membrane Dispersion Microreactor

Study On The Rheological Behavior Of Sub-Micron Alumina Aqueous Suspensions

Preparation of Large-Pore-Volume Gamma-Alumina Nanofibers with A Narrow Pore Size Distribution in A Membrane Dispersion Microreactor

Stabilization mechanism of alumina powder dispersed in silica sol

Dispersion of Oleate‐Modified CuO Nanoparticles in a Nonpolar Solvent

Preparation and Characterization of Nanocrystalline Gamma-Al2o3 by Sol-Gel Process

Improvement in dispersion stability of alumina suspensions and corresponding chemical mechanical polishing performance

Size-controlled synthesis of nano α-alumina particles through the sol–gel method

Synthesis of γ-alumina via precipitation in ethanol

Synthesis and sintering behavior of a nanocrystalline α-alumina powder

Investigation of Dispersion of Nickel Oxide Onto the Surface of Gamma-Alumina by Exafs

Coprecipitation Synthesis of Large-Pore-Volume Γ-Alumina Nanofibers by Two Serial Membrane Dispersion Microreactors with a Circulating Continuous Phase

Controllable Preparation Conditions of Monodisperse γ-Al2O3 Nanoparticles

PREPARATION AND CHARACTERIZATION OF ALUMINA NANOCRYSTALLINE POWDER BY COMPLEXING SOL-GEL METHOD

Controllable Inducing Preparation of Polymorphous Hundred-Micron Alumina Microspheres Via Droplet-Based Two-Stage Microfluidic Solvent Extraction Technology