Abstract:We have investigated the physical origin of anomalous in-plane thermal expansion (TE) anisotropy leading to invar-like behavior and negative TE in nanostructured NiTi sheets manufactured via severe cold-rolling. The roles of grain size (GS), crystallographic texture, thermally-induced phase transformation, and intrinsic (lattice level) TE of austenite (B2) and martensite (B19′) phases on the macroscopic TE behavior are addressed. It is shown that by controlling the cold-rolling thickness reduction and heat-treatment temperature the coefficient of thermal expansion (CTE) can be controlled in a wide range from positive (α ∼ 2.1 × 10−5 K−1) to negative (α ∼ −1.1 × 10−5 K−1) via in-plane anisotropy of TE. A very small CTE of α ∼ −5.3 × 10−7 K−1 (invar-like behavior) in a wide temperature window of 230 K (353–123 K) is obtained at an angle of 33.5° to the rolling direction (RD) of the severely cold-rolled sheet. TEM and XRD studies show that the microstructure underlying such anomalous TE behavior consists of a mixture of B2 nano-grains and retained/residual deformation-induced martensite and that the observed anomalous TE anisotropy is due to the intrinsic anisotropic TE of residual martensite. The invar-like behavior is the result of the cancellation of the positive TE of austenite phase with the negative TE of residual martensite along 33.5° to the RD. A simple rule of mixture model incorporating the intrinsic TE of B2 and B19′ lattices and the texture coefficients of the sample is proposed which successfully captures the anomalous in-plane TE anisotropy. The discovery of high dimensional stability over a wide temperature window along with temperature insensitive non-hysteretic linear superelasticity of the severely-deformed NiTi opens up a new route for designing stable SMAs for applications in ragged environments.

In-plane low thermal expansion of NiTi via controlled cross rolling

Origin of zero and negative thermal expansion in severely-deformed superelastic NiTi alloy

Negative and Zero Thermal Expansion NiTi Superelastic Shape Memory Alloy by Microstructure Engineering

Tailoring thermal expansion of shape memory alloys through designed reorientation deformation

The mechanism of negative linear thermal expansion behavior of cold-rolled Ti-34Nb alloy

Cryogenic Rolling Induces Quasi-Linear Superelasticity with High Strength over a Wide Temperature Range in TiNi Shape Memory Alloys

Inverse Gradient Nanostructure Through Gradient Cold Rolling Demonstrated with Superelasticity Improvement in Ti-50.3Ni Shape Memory Alloy

Anisotropic Negative Thermal Expansion Behavior of the As-Fabricated Ti-Rich and Equiatomic Ti–Ni Alloys Induced by Preferential Grain Orientation

High temperature superelasticity realized in equiatomic Ti-Ni conventional shape memory alloy by severe cold rolling

Change in Microstructures and Mechanical Properties of Biomedical Ti-Nb-Ta-Zr System Alloy through Cross-Rolling

Anisotropy of elastocaloric cooling effect in equal atomic ratio NiTi alloy with crystallographic texture

Comparative study on mechanical and shape memory properties of hot forged NiTiNb in axial and radial direction

Microstructure evolution and recrystallization of Ti-44.5Al-3.8Nb-1Mo-0.2B alloy with different initial microstructure during hot pack rolling

Microstructural Evolution in NiTi Alloy Subjected to Surface Mechanical Attrition Treatment and Mechanism

Improved elastocaloric effect of NiTi shape memory alloys via microstructure engineering: A phase field simulation

R-Phase Transformation Evolution in NiTi SMA Wires Studied via the Internal Friction Technique

Temperature Dependence of Elastocaloric Effect in a Microstructurally Graded NiTi Alloy

In-situ synchrotron high energy X-ray diffraction study of micro-mechanical behaviour of R phase reorientation in nanocrystalline NiTi alloy

Modeling the martensite reorientation and resulting zero/negative thermal expansion of shape memory alloys

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

The role of texture on superelasticity and elastocaloric effect in severely rolled Ti-44Ni-5Cu-1Al (at%) shape memory alloy