Abstract:Ti 2 AlNb-based alloy foils are promising for aerospace applications. In this work, we investigate the effects of different hot rolling processes on the microstructure and mechanical properties of hot rolled sheets, as well as on the deformation mechanism, microstructure evolution, and mechanical properties of subsequent cold rolling during the formation of Ti 2 AlNb-based alloy foils. Due to the finer uniform grain size, lower dislocation density, and higher compatible deformation between the phases, the elongation of the sheet after hot rolling in the α 2 + O + B2 phase field is 6.8%, which is 2.5 times higher than that of after hot rolling in the α 2 + B2 phase field. The difference in microstructure and mechanical properties after the hot rolling affects the quality of the formation, the deformation mechanism, and the mechanical properties during the cold rolling. The deformation in the cold rolling is mainly in the form of shear bands. Due to the difference in microstructure, the macro shear bands are oriented parallel or at 30–60° to the rolling direction. As the degree of cold rolling deformation increases, the macro shear bands become denser and wider. When rolling to 80%, the micro shear bands <200 nm thick are formed in the microstructure. In addition, during the cold rolling, work hardening, dislocation strengthening, and grain refinement lead to a gradual increase in strength, with elongation decreasing first and then increasing. The texture evolution affects the elastic modulus of the alloy, where the increase in {111}〈110〉 texture causes a decrease in the elastic modulus, while much anomalous slip system {110}〈001〉 activates the {111}〈112〉 texture and increases the elastic modulus. This process should be considered for the cold rolling preparation of Ti 2 AlNb-based alloy foil because of the superior properties of the sheet after hot rolling in the α 2 + O + B2 phase field, its better strength and elongation and higher yield when cold rolling.

The mechanism of negative linear thermal expansion behavior of cold-rolled Ti-34Nb alloy

Effect of Annealing Temperature and External Tensile Stress on Negative Thermal Expansion to Cold Rolled Ti–23Nb–0.7Ta–2Zr Alloy

Nano-precipitation leading to linear zero thermal expansion over a wide temperature range in Ti22Nb

Texture and superelastic behavior of cold-rolled TiNbTaZr alloy

Reversible Negative Thermal Expansion Response and Phase Transformation Behavior of a Ti-Rich Ti54Ni46 Alloy Prepared by Rapid Solidification

Anisotropic Negative Thermal Expansion Behavior of the As-Fabricated Ti-Rich and Equiatomic Ti–Ni Alloys Induced by Preferential Grain Orientation

Origin of zero and negative thermal expansion in severely-deformed superelastic NiTi alloy

In-plane low thermal expansion of NiTi via controlled cross rolling

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

Change in Microstructures and Mechanical Properties of Biomedical Ti-Nb-Ta-Zr System Alloy through Cross-Rolling

Evolution of Microstructural and Mechanical Properties during Cold-Rolling Deformation of a Biocompatible Ti-Nb-Zr-Ta Alloy

Negative and Zero Thermal Expansion NiTi Superelastic Shape Memory Alloy by Microstructure Engineering

Tuning Thermal Expansion by a Continuing Atomic Rearrangement Mechanism in a Multifunctional Titanium Alloy

Effects of composition on the mechanical properties and negative thermal expansion in martensitic TiNb alloys

Zero thermal expansion and high Young's modulus in Ti-Nb achieved by concurrent α′′ iso and ω precipitation

Martensite Phase Transformation of TiNbTaZr Alloy During Cold Rolling

Thermal Stability of Cold-Deformed Nanostructure in Ti-15-3 Alloy

Effect of hot rolling process on the evolution of microstructure and mechanical properties of Ti 2 AlNb-based alloy foil during cold rolling

Microstructure and Mechanical Properties of Cold-Rolled TiNbTaZr Biomedical Β Titanium Alloy

Effect of Cold Rolling and Hot Rolling on Recrystallization Texture and Superelastic Properties of Ti–30Zr–10Nb–2Sn Shape Memory Alloy

The microstructure evolution and tensile properties of Ti–43Al–4Nb–1Mo-0.2B alloy during hot rolling