Abstract:In this contribution, the underlying mechanisms of microstructure evolution and texture development during the cold rolling and annealing of a Ti-2Al-1.5Mn alloy were investigated and elucidated comprehensively. As a result of the heightened dislocation density and grain boundary, the hardness ascended as the successive reductions applied. However, the annealing treatment reinstated the structure through complete recrystallization. During cold working, the dominant basal and prismatic glide inclined the c-axis and < 101̅0 > axis towards the compressive direction and the rolling direction (RD), respectively. The primary rolled orientation consisted of < 101̅0 > fiber, the orientation of { 1̅21̅3 }< 101̅0 > with Euler angle {10°, 45°, 0°}and { 1̅21̅7 }< 101̅0 > with Euler angle {5°, 25°, 0 °} were predominant. Schmid Factor (SF) analysis and orientation rotation related to various textures demonstrated that basal slipping resulted in a descending φ angle in the Bunge system and < 101̅0 > pole parallel to the RD was the stable orientation. It was revealed that the recrystallized grains preponderantly exhibited textures inherited from the rolled matrix, but a new T-type texture also emerged. This implies that both the strain-induced boundary migration (SIBM) mechanism and selective grain growth, which nucleates at different sites, manipulate the annealing process. The study enhances our comprehension of texture evolution mechanisms involved in the plastic forming and helps ascertain the most effective operational parameters for producing high-performance titanium plates.

The role of texture on superelasticity and elastocaloric effect in severely rolled Ti-44Ni-5Cu-1Al (at%) shape memory alloy

Anisotropy of elastocaloric cooling effect in equal atomic ratio NiTi alloy with crystallographic texture

Texture and superelastic behavior of cold-rolled TiNbTaZr alloy

Effect of Cold Rolling and Hot Rolling on Recrystallization Texture and Superelastic Properties of Ti–30Zr–10Nb–2Sn Shape Memory Alloy

Stable and Large Superelasticity and Elastocaloric Effect in Nanocrystalline Ti-44Ni-5Cu-1Al (at%) Alloy

Texture Evolution, Microstructure, and Superelastic Properties of Different Cold-Rolled Ti-Zr-Nb-Sn Strain Glass Alloys

Superelasticity and elastocaloric effect in a textured Ti-Nb-Zr-Ta alloy with narrow stress hysteresis

The characterization of shape memory effect for low elastic modulus biomedical β-type titanium alloy

Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5Mn alloy

Elastocaloric effect with a broad temperature window and low energy loss in a nanograin Ti-44Ni-5Cu-1Al ( at · % ) shape memory alloy

Rolling texture development in a dual-phase Mg-Li alloy: The role of temperature

Temperature Dependence of Elastocaloric Effect in a Microstructurally Graded NiTi Alloy

Texture Evolution and the Recrystallization Behavior in a Near Β Titanium Alloy Ti-7333 During the Hot-Rolling Process

Texture evolution and slip mode of a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr dual-phase alloy during cold rolling based on multiscale crystal plasticity finite element model

Impact of Non-Isothermal Warm Rolling on Microstructure, Texture and Mechanical Properties

Effects of texture on the damping characteristics of cold-rolled and annealed Ti 50 Ni 40 Cu 10 shape memory alloy

Effect of texture on shape memory property of Ti–16Nb high temperature shape memory alloy

Static Recrystallization Behavior and Texture Evolution during Annealing in a Cold Rolling Beta Titanium Alloy Sheet

Meso-scopically Homogeneous Superelastic Transformation and Related Elastocaloric Effect in a Textured Ti-based Shape Memory Alloy

Tailoring texture in a near-α titanium alloy: Insights from strain paths and cooling rate influences

Tailoring Grain Size and Precipitation Via Aging for Improved Elastocaloric Stability in a Cold-Rolled (Ni,cu)-Rich Ti–Ni–Cu Alloy