Abstract:By formulating the martensite transformation start temperature ( M s ) of NiTi shape memory alloys (SMAs) as a function of Ni concentration, a Ni-concentration dependent phase field model is newly proposed in this work. Then, based on correspondent phase field simulations, the elastocaloric effects (eCEs) of the NiTi SMA samples with different Ni-concentration gradients and various aspect ratios are investigated and discussed. The simulated results show that the martensite transformation start stress of NiTi SMAs in the sample with a Ni-concentration gradient along the tensile direction progressively increases during the tensile loading, leading to a step-by-step martensite transformation; hence the suppression of microscopic instability results in a small stress-strain hysteresis loop in the process of tensile-unloading and a tremendous improvement in the coefficient of performance of material ( COP mat ) if addressing the eCE of the sample. When the aspect ratio of the sample is relatively small (e.g., 1:1), the microscopic instability can be suppressed due to the strong boundary constraint, indicating that reducing the aspect ratio is an efficient way to obtain a small stress-strain hysteresis loop and improve the COP mat of NiTi SMA samples. Moreover, for the sample with a Ni-concentration gradient, when its aspect ratio is relatively large, its eCE is mainly determined by the Ni-concentration gradient; while, when the aspect ratio becomes relatively small, the eCE of the sample is strongly dependent on both the Ni-concentration gradient and the aspect ratio. It implies that the NiTi SMA sample with both a small Ni-concentration gradient and a small aspect ratio and that with both a large Ni-concentration gradient and a large aspect ratio demonstrate the optimal eCE. In other words, a pioneering approach, i.e., concentration-gradient engineering, can be put forward to enhance the eCE of NiTi SMAs based on the detailed phase field simulations. The new findings in this work provide available guidance for improving the eCE of NiTi SMAs and open a novel way for developing advanced SMA-based elastocaloric materials.

Tailoring thermal expansion of shape memory alloys through designed reorientation deformation

Modeling the martensite reorientation and resulting zero/negative thermal expansion of shape memory alloys

Negative and Zero Thermal Expansion NiTi Superelastic Shape Memory Alloy by Microstructure Engineering

Tailored thermal expansion alloys

Improved elastocaloric effect of NiTi shape memory alloys via microstructure engineering: A phase field simulation

Enhancing elastocaloric effect of NiTi alloy by concentration-gradient engineering

Tuning Thermal Expansion by a Continuing Atomic Rearrangement Mechanism in a Multifunctional Titanium Alloy

Stress-induced detwinning/reorientation of hierarchically twinned martensite and deformation micro-mechanism in Ni52Mn27Ga17Co4 shape memory alloys: Experimental and phase-field studies

In-plane low thermal expansion of NiTi via controlled cross rolling

Thermomechanical response and elastocaloric effect of shape memory alloy wires

Origin of zero and negative thermal expansion in severely-deformed superelastic NiTi alloy

High temperature superelasticity realized in equiatomic Ti-Ni conventional shape memory alloy by severe cold rolling

Two-way shape memory effect induced by martensite deformation and stabilization of martensite in Ti36Ni49Hf15 high temperature shape memory alloy

Phase Transformation Characteristics of High-Temperature Shape Memory Alloy under Tension, Compression, and Bending Actuation Cycling

Strain states and unique properties in cold-rolled TiNi shape memory alloys

Deformation induced self-accommodation morphology transition from triangular to nano-twinned martensite in Ti-Nb-Zr shape memory alloys

Efficient phase-field simulation for linear superelastic NiTi alloys under temperature gradients

Thermodynamic Performance Test and Phenomenological Constitutive Model of NiTiNb Shape Memory Alloy

Tailoring Negative Thermal Expansion via Tunable Induced Strain in La-Fe-Si-Based Multifunctional Material

Observation of Phase Transformation and Structural Analysis for Ni-Ti Alloy by Molecular Dynamics Simulation

Linear-superelastic Ti-Nb nanocomposite alloys with ultralow modulus via high-throughput phase-field design and machine learning