Abstract:Materials with tunable negative thermal expansion (NTE) are highly demanded in various functional devices. La(Fe, Si)13-based compounds are promising NTE materials due to their outstanding NTE properties. However, their poor mechanical properties and related short service life restrict their practical applications. In this work, epoxy resin with positive thermal expansion is used to synthesize La-Fe-Si/resin composites. The NTE of La-Fe-Si/resin composites can be manipulated by optimizing the La-Fe-Si particle size and resin content, and tailoring resin content could tune the NTE more effectively. The average linear coefficient of thermal expansion of the composites decreases from -275.0 × 10-6 K-1 to -4.9 × 10-6 K-1 over the magnetic transition temperature range as the resin content increases from 3 wt.% to 80 wt.%. In addition, zero thermal expansion is achieved in the La-Fe-Si/resin composite with 20 wt.% resin. The resin would reinforce the binding force by filling the pores between the particles. The La-Fe-Si/resin composite with 80 wt.% resin exhibits highly improved mechanical properties; for example, its compressive strength of 205 MPa is 75% higher than that of the La-Fe-Si/resin composite with 3 wt.% resin. The prepared La-Fe-Si/resin composites can be machined into different shapes for practical applications, such as thin plates, strips, and rods. Furthermore, the La-Fe-Si/resin composites can undergo 1000 thermal cycles without NTE performance degradation and mechanical integrity loss, indicating durable cycle stability. Hence, significantly tunable NTE with high mechanical properties and long-term cycle stability makes La-Fe-Si/resin composites present great application potential as NTE materials.

Tailoring Negative Thermal Expansion via Tunable Induced Strain in La-Fe-Si-Based Multifunctional Material

Tunable negative thermal expansion in La(Fe, Si)13/resin composites with high mechanical property and long-term cycle stability

Two-dimensional zero thermal expansion in low-cost MnxFe5−xSi3 alloys via integrating crystallographic texture and magneto-volume effect

Controllable Negative Thermal Expansion in NaZn13-type La(Fe, Co, Al)13 Compounds

Good Comprehensive Performance of Laves Phase Hf1-Ta Fe2 As Negative Thermal Expansion Materials

Isotropic Negative Thermal Expansion in the Multiple-Phase La-Fe-Co-Si-Cu Alloys with Enhanced Strength and Ductility

Broad Negative Thermal Expansion Operation-Temperature Window Achieved by Adjusting Fe-Fe Magnetic Exchange Coupling in La(Fe,Si)13 Compounds.

Tunable Thermal Expansion and Magnetism in Zr-doped ScF3

Design of negative/nearly zero thermal expansion behavior over a wide temperature range by multi-phase composite

Giant uniaxial negative thermal expansion in FeZr 2 alloy over a wide temperature range

Tunable Near-Zero Thermal Expansion in the C-doped La(Fe, Si)13 Compounds at Cryogenic Temperatures

Designing (Hf,ta)fe2-Based Zero-Thermal-Expansion Composites Consisting of Multiple Laves Phases

Zero Thermal Expansion Achieved by an Electrolytic Hydriding Method in La(Fe,Si)13 Compounds

Tunable thermal expansion via the magnetic phase competition in kagome magnets

An Isotropic Zero Thermal Expansion Alloy with Super-High Toughness

Design of near-zero thermal expansion composites with superior mechanical properties in a wide temperature region

Tailoring thermal expansion coefficient from positive through zero to negative in the compositional crossover alloy Ti50(Pd40Cr10) by uniaxial tensile stress

Strain regulated giant negative thermal expansion in hexagonal sulfides (Ni1− x Fe x )1− δ S

Negative Thermal Expansion over a Wide Temperature Range in Fe-Doped MnNiGe Composites

Significant Zero Thermal Expansion Via Enhanced Magnetoelastic Coupling in Kagome Magnets

Tailoring thermal expansion of shape memory alloys through designed reorientation deformation