Abstract:The hardness, tensile ductility and fatigue lifetime of nanostructured (NC) Cu–Zr alloyed thin films have been systematically measured at different Zr additions (0, 0.5, 2.0, 4.0, 8.0at.%). Experimental results showed that the Cu–0.5at.% Zr film exhibited the highest hardness, largest ductility and longest fatigue lifetime, which are increased by 120%, 80%, and above an order of magnitude, respectively, in comparison with its pure Cu counterpart. The simultaneous improvements of mechanical properties are rationalized with respect to microstructural evolutions related to Zr segregation at grain boundaries (GBs). Besides refinement in NC grains and enhancement in nanotwins, grain orientation was apparently modified by the GB Zr segregation. (110) grains were promoted and layer-like microstructure was formed with coexistence of three orientation of grains at the upper layer, facilitating Cu grain growth at room temperature. GB doping strengthening worked as an additional strengthening mechanism and mechanically driven grain growth became the predominant deformation mechanism and fatigue mechanism, which accounted for the optimal combination of mechanical properties achieved in the Cu–0.5at.% Zr film. When the Zr content was >2.0at.%, however, amorphous phases were formed at the GBs due to locally increased Zr concentration. The GB doping strengthening effect was concomitantly weakened and strength was gradually decreased. In addition, stress/strain localization occurred readily at the amorphous phase regions, triggering intergranular fracture and reducing ductility. During cyclic testing in the low stress range, GB amorphous phases strengthened rather impaired the GBs, which gave the Cu–Zr films a fatigue lifetime greater than that of the pure NC Cu film. The present results clearly indicate that, once solute content is suitably explored, the solute segregation at GBs in NC metals can not only retain NC grains in loading-free conditions, but also impart enhanced mechanical properties when exposed to applied stress.

Effects of nanoscale chemical heterogeneity on the wear, corrosion, and tribocorrosion resistance of Zr-based thin film metallic glasses

Atomic-scale Heterogeneity in Large-Plasticity Cu-doped Metallic Glasses

The role of nano-scale elastic heterogeneity in mechanical and tribological behaviors of a Cu–Zr based metallic glass thin film

Corrosion effects on the nanotribology of a Ni62Nb38 metallic glass

Molecular dynamics simulation on the mechanical properties of Zr-Cu metallic nanoglasses with heterogeneous chemical compositions

The Tribological Behaviors in Zr-Based Bulk Metallic Glass with High Heterogeneous Microstructure

Effect of Nb Substitution for Cu on Glass Formation and Corrosion Behavior of Zr Cu Ag Al Be Bulk Metallic Glass

Nanoscale Tunable Reduction of Interfacial Friction on Nano-Patterned Wear-Resistant Bulk Metallic Glass

Tribological and Corrosion Behaviors of Zr-doped Graphite-Like Carbon Nanostructured Coatings on Ti6Al4V Alloy

An Abnormal Correlation Between Electron Work Function and Corrosion Resistance in Ti-Zr-Be-(Ni/Fe) Metallic Glasses

Design of amorphous-nanocrystalline films of TiAlCrNbZr x multi-component alloy: The effect of Zr on the corrosion resistance and mechanical properties

Structural Heterogeneity, Ductility, and Glass Forming Ability of Zr-Based Metallic Glasses

Correlation Between Corrosion Performance And Surface Wettability In Zrticunibe Bulk Metallic Glasses

Microstructural Evolution, Mechanical Properties and Deformation Mechanisms of Nanocrystalline Cu Thin Films Alloyed with Zr

Sliding Wear Behavior of Fully Nanotwinned Cu Alloys

Tailoring mechanical heterogeneity, nanoscale creep deformation and optical properties of nanostructured Zr-based metallic glass

Corrosion mechanisms of Zr-based bulk metallic glasses in NaBr solution

Microstructure evolution and corrosion mechanism of laser cladded Zr-Cu-Ni-Al in-situ metallic glass matrix composite coatings

Mechanical and tribological properties of Zr–Cu–Ni–Al bulk metallic glasses with dual-phase structure

An origin of corrosion resistance changes of Zr alloys: effects of Sn and Nb on grain boundary strength of surface oxide

Nanostructure Characteristics of Al3Sc1-xZrx Nanoparticles and Their Effects on Mechanical Property and SCC Behavior of Al-Zn-Mg Alloys