Abstract:In wheel rail adhesion studies, most of the test rigs used are simplified designs such as a single wheel or wheelset, but the results may not be accurate. Alternatively, representing the complex system by using a full vehicle model provides accurate results but may incur complexity in design. To trade off accuracy over complexity, a bogie model can be the optimum selection. Furthermore, only a real time model can replicate its physical counterpart in the time domain. Developing such a model requires broad expertise and appropriate software and hardware. A few published works are available which deal with real time modeling. However, the influence of the control system has not been included in those works. To address these issues, a real-time scaled bogie test rig including the control system is essential. Therefore, a 1:4 scaled bogie roller rig is developed to study the adhesion between wheel and roller contact. To compare the performances obtained from the scaled bogie test rig and to expand the test applications, a numerical simulation model of that scaled bogie test rig is developed using Gensys multibody software. This model is the complete model of the test rig which delivers more precise results. To exactly represent the physical counterpart system in the time domain, a real-time scaled bogie test rig (RT SBTR) is developed after four consecutive stages. Then, to simulate the RT-SBTR to solve the internal state equations and functions representing the physical counterpart system in equal or less than actual time, the real-time simulation environment is prepared in two stages. To such end, the computational time improved from 4 times slower than real time to 2 times faster than real time. Finally, the real time scaled bogie model is also incorporated with the braking control system which slightly reduces the computational performances without affecting real time capability.

Performance and robustness analysis of a Hardware In the Loop full-scale roller-rig for railway braking and traction testing

Hardware-in-the-Loop Platform for Virtual Certification of Traction Systems for Railway

Wheel/rail adhesion and analysis by using full scale roller rig

Modeling, System Identification, and Control of a Railway Running Gear with Independently Rotating Wheels on a Scaled Test Rig

An Innovative HiL Test Environment with a Fully Integrated Brake System and Automated Brake Performance Evaluation

A Hardware-in-the-Loop Approach to Test Rotary Electromagnetic Shock Absorbers

Study on dynamic performance of high-speed railway vehicle using roller rig and numerical simulation

Monitoring the bogie lateral dynamics of a high-speed train through wireless sensor nodes

Real time multibody modeling and simulation of a scaled bogie test rig

Advanced Methods for Monitoring and Fault Diagnosis of Control Loops in Common Rail Systems

Development of Test Rig for High-Speed Railway Rolling Bearings

The Effect of a Variable Disc Pad Friction Coefficient for the Mechanical Brake System of a Railway Vehicle

A robust and fail-safe semi-active vertical damper to improve ride comfort

Virtual durability test rigs for automotive engineering

A New Strategy for Dynamic Weighing in Motion of Railway Vehicles

An Explicit Nonlinear Model Predictive ABS Controller for Electro-Hydraulic Braking Systems

Dynamic wheel-rail interaction of a train crossing a turnout under traction/braking behaviour and research on rail wear of the turnout

Development of Load System for High-Speed Railway Rolling

Test Rig for Spline Couplings Working in Misaligned Conditions

Accuracy Improvement of Braking Force via Deceleration Feedback Functions Applied to Braking Systems

Research on wheel-rail dynamic interaction of high-speed railway under low adhesion condition