Abstract:System-level testing of electronics is an affordable method of assessment of the performance of complete electronic systems designed for applications in the radiation environment. Compared to component-level testing, system-level test offers a much smaller degree of observability about the performance of particular system elements. The information received during the irradiation of a system might be therefore not sufficient for the identification of every system under test (SUT) malfunction. As a consequence, no action might be taken to recover the system operation while certain parts of its functionality would be lost due to the radiation-induced effects. This can lead to the incorrect execution of the system-level test and improper conclusions about radiation-induced effects. The present paper demonstrates a method allowing an efficient identification of system-level failures based on the system total current consumption monitoring. The proposed technique can be easily implemented with common instrumentation and at the same time provides valuable feedback on SUT operation. The retrieved current consumption information can be used to identify system failures that may be not observable through the communication channels that are by default included in the tested setup. Furthermore, the posttest analysis can be performed on the collected data to investigate the SUT condition along the complete timeline of its irradiation. The verification of the proposed method was performed during the qualification test of a system designed for applications at the high-energy particle accelerator facility.

TID Level of Failure Dependence From Operating Configuration of the System—Space Class DC/DC Converter Case Study

Total Ionizing Dose Effect and Single Event Burnout of VDMOS with Different Inter Layer Dielectric and Passivation.

A Characterization Method for TID Versus Temperature Effects on Microelectronic Circuits

A Stabilized Numerical Scheme to Simulate Synergistic Effect of TID and TDR in Semiconductor Devices

Compensation for TID Damage in SOI Pixel Devices

Radiation Qualification by Means of the System-Level Testing: Opportunities and Limitations

Total Ionizing Effects on Static Characteristics of 1200V SiC MOSFET Power Devices with Planar and Trench Structures

Impact of TID on the Transient Ionizing Irradiation Response of CMOS Circuits

Total ionizing dose estimation of ITER upper port remote handling equipment

Including the Effects of Process-Related Variability on Radiation Response in Advanced Foundry Process Design Kits

Including the effects of process-related variability on radiation response using a new test chip

X-ray technological irradiation for TID studies on silicon sensor and electronic devices in a medical facility

Enhancement of System Observability During System-Level Radiation Testing Through Total Current Consumption Monitoring

Radiation-hardened Library Cell Template and Its Total Ionizing Dose (TID) Delay Characterization in 65nm CMOS Process

Ionization Radiation-Induced Reliability Degradation of SiC Power MOSFET

Total Ionizing Dose and Single-Event Effect Response of the AD524CDZ Instrumentation Amplifier

Investigation of Unique Total Ionizing Dose Effects in 0.2 um Partially-Depleted Silicon-on-Insulator Technology

Test and Verification of 0.13 μm SOI Standard Cell Library Total-Dose Radiation Hardened

Characteristics and ultra-high total ionizing dose response of 22 nm fully depleted silicon-on-insulator

Experimental Study of Transient Dose Rate Effect on System-in-Package SZ0501

The accelerated TID degradation induced by neutron irradiation on CMOS microprocessor