Abstract:Recent advancements in printable mesoscopic perovskite solar cells (p‐MPSCs) face challenges in improving perovskite precursor solution diffusion during assembly. The research achieves effective gap‐driven diffusion, forming well‐filled perovskite through TiO2 nanorod arrays. The bilayer electron transport layer with dual crystal phase and cascaded energy levels demonstrates superior electron collection and directional transport. Suppression of nonradiative recombination and efficient charge transfer lead to notable enhancements in open‐circuit voltage and short‐circuit current density. Consequently, p‐MPSCs' power conversion efficiency increases from 14.32% to 16.07%, close to literature's highest reported value of 16.21%. These results highlight a novel interface engineering approach for high‐performance p‐MPSCs fabrication. Recently, enhancing the photovoltaic performance of printable mesoscopic perovskite solar cells (p‐MPSCs) poses a significant challenge, particularly in improving the diffusion of perovskite precursor solutions during device assembly. In this research, effective gap‐driven diffusion of the precursor solution perovskite is successfully achieved, leading to the formation of well‐filled and crystallized perovskite through TiO2 nanorod arrays. By incorporating upper‐layer TiO2 nanoparticles, a bilayer electron transport layer with dual crystal phase is developed, establishing a cascaded energy level structure that exhibits superior capabilities in electron collection and directional transport. The effective suppression of nonradiative recombination and efficient charge transfer result in notable enhancements in both open‐circuit voltage and short‐circuit current density. Consequently, the power conversion efficiency of p‐MPSCs devices based on MAPbI3 γ‐butyrolactone solution increases from 14.32% to 16.07% (highest reported value in the literature is 16.21%). These findings highlight a novel interface engineering approach for the fabrication of high‐performance p‐MPSCs devices.

Carbon‐Based Printable Perovskite Solar Cells with a Mesoporous TiO 2 Electron Transporting Layer Derived from Metal–Organic Framework NH 2 ‐MIL‐125

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Mesoporous TiO 2 Electron Transport Materials Derived from 2D Ti-MOFs for Enhanced Power Conversion Efficiency in Printed Mesoscopic Perovskite Solar Cells

Low‐Temperature in Situ Amino Functionalization of TiO2 Nanoparticles Sharpens Electron Management Achieving over 21% Efficient Planar Perovskite Solar Cells

Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells via a Multifunctional Fluorinated Molecule

Nanoscale Pumping Effect of Perovskite via Supported Bilayer Electron Transport Layer for Efficient Printable Mesoscopic Solar Cells

Single Source, Surfactant‐Free, and One‐Step Solvothermal Route Synthesized TiO 2 Microspheres for Highly Efficient Mesoscopic Perovskite Solar Cells

Designed Mesoporous Architecture by 10–100 nm TiO2 as Electron Transport Materials in Carbon-Based Multiporous-Layered-Electrode Perovskite Solar Cells

Fully Printed High‐Performance Quasi‐Two‐Dimensional Perovskite Solar Cells via Multifunctional Interfacial Engineering

Mesoporous structured MoS2 as an electron transport layer for efficient and stable perovskite solar cells

Mesoporous structured MoS 2 as an electron transport layer for efficient and stable perovskite solar cells

High Permeable Microporous Structured Carbon Counter Electrode Assisted by Polystyrene Sphere for Fully Printable Perovskite Solar Cells

Room‐Temperature‐Processed, Carbon‐Based Fully Printed Mesoscopic Perovskite Solar Cells with 15% Efficiency

ETL-Free Perovskite Solar Cells with an Efficiency of 19.81% in Open Air

SnO2-Ti3C2 Blends As Electron Transport Layer for Efficient and Easily Fabricated Planar Perovskite Solar Cells

Fabrication of TiO2/MXene Nanohybrid Electron Transport Layer by Artist Spray Gun Assisted Pyrolysis Method for Efficient Carbon Perovskite Solar Cell

Applying Neoteric MgTiO3-coated TiO2 Nanoparticulate Films As Scaffold Layers in Perovskite Solar Cells Based on Carbon Counter Electrode for Retarding Charge Recombination

Low‐Temperature‐Deposited TiO 2 Nanopillars for Efficient and Flexible Perovskite Solar Cells

In Situ Reconstruction Post‐Treatment for Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells

Stratified Oxygen Vacancies Enhance the Performance of Mesoporous TiO2 Electron Transport Layer in Printable Perovskite Solar Cells

Ti3C2 MXene nanosheets modified TiO2 ETLs enables efficient solar cells with outstanding device consistency