Abstract:Off-line programming of the polishing tool trajectory for complex workpieces is challenging due to the nontrivial material removal model and the polishing accuracy requirement. Current tool trajectory planning methods are mainly developed for some simple surfaces but cannot handle the increasingly complicated industrial parts, such as the wheel hubs. This article first develops a numerical contact mechanics model for the point-sampled complex workpieces. The contact pressure distribution and the material removal depths on the workpiece point cloud can be predicted efficiently. A novel high-priority subregion searching algorithm is developed to track the most-worth-polishing workpiece points. By selecting the path pattern as direction-parallel, the path direction, tool dwell times, and the path spacings inside each extracted subregion are optimized to minimize the deviation from the desired material removal depths. The effectiveness of the proposed method is verified by performing disk polishing simulations on workpieces with different shapes. A robotic polishing experiment is also conducted on a wheel hub. Both simulation and experimental results show that reasonable tool trajectories can be generated on the workpiece, and the desired material removal depths can be achieved. Note to Practitioners—In robotic polishing industries, it is crucial to plan the tool trajectory (tool path and feed velocity) to achieve desired material removal depths on the workpiece surface, which means high surface quality. In this article, a model-based tool trajectory planning method for robotic polishing of complex surfaces that are represented by the point cloud form is presented. The advantage of using the point cloud is that workpiece surfaces with varying curvatures and complex features, e.g., grooves and holes, need not be expressed explicitly. The proposed method generates high-priority subregions according to the updated material removal distribution dynamically. In this work, the polishing path pattern is chosen as direction-parallel. Based on an efficient numerical contact mechanics and material removal model, the path locations and the tool dwell times inside each subregion are optimized to minimize the deviation between the actual and the desired material removal depths. When the desired material removal depths are attained in an extracted subregion, the algorithm finds the next high-priority subregion until the whole workpiece is well polished. The trajectory planning method can be integrated into an industrial robot with the force-control module. Future work is to integrate the roughness model into the tool trajectory planning method.

A method for analyzing the texture features of free-form surface polishing paths based on co-occurrence matrix

Study on the Removal Function of Annular Polishing Pad Based on the Computer Controlled Polishing Technology

Path Planning of Mechanical Polishing Process for Freeform Surface with a Small Polishing Tool

Surface profile prediction modeling of spiral toolpath for axial ultrasonic vibration-assisted polishing

Compliant Polishing of Thin-Walled Freeform Workpiece

A Contribution to Texture Analysis of Pavements under Simulated Polishing: Some New Findings

B-spline Surface Approximation Method for Achieving Optimum Dwell Time in Deterministic Polishing

Fractal Tool-Path Planning For Free-Form Surface Polishing System

A Model-Based Trajectory Planning Method for Robotic Polishing of Complex Surfaces.

Influence of motion modes on surface quality in CCOS

Using Wavelet Packet Transform for Surface Roughness Evaluation and Texture Extraction

Effect of relative feeding direction on surface texture in abrasive cloth flap wheel polishing process

Rapid prediction of multi-directionality of polished surface topography based on angular spectrum

Path Planning under Force Control in Robotic Polishing of the Complex Curved Surfaces

Research on the shear thickening polishing CaF 2 with textured hollow polishing tool

Analysis of the Smoothing Characteristics and Shape-Retaining Ability of Conformal Vibration Polishing and Suppression Strategy for Full-Spatial Frequency Errors of Optics

Evaluating Surface Roughness of Castings Using K-means Clustering and Watershed Transform

Fractal and spectral analysis of aggregate surface profile in polishing process

Modeling and analysis for material removal and surface roughness in fluid jet polishing of optical glass

Polishing Path Planning Based on Point Cloud.

Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces